Index: /ossiedev/branches/ssayed/devs/src/system/nodebooter/nodebooter.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/nodebooter/nodebooter.cpp (revision 7853) +++ /ossiedev/branches/ssayed/devs/src/system/nodebooter/nodebooter.cpp (revision 8424) @@ -77,5 +77,6 @@ CF::DeviceManager_var DeviceManager_objref; - + // Start CORBA + ORB *orb_obj = new ORB(argc, argv); // parse command line options @@ -90,4 +91,6 @@ int startDomainManager = 0; + // Start CORBA + ORB *orb_obj = new ORB(argc, argv); while ((c = getopt(argc, argv, "D::n:d:h")) > 0) { @@ -106,7 +109,7 @@ break; - case 'n': - devMgrNode = new string(optarg); - break; + case 'n': + devMgrNode = new string(optarg); + break; case 'h': @@ -122,9 +125,4 @@ exit (0); } - - // Start CORBA - - ORB *orb_obj = new ORB(argc, argv); - // Start Domain Manager if requested Index: /ossiedev/branches/ssayed/devs/src/system/nodebooter/configure.ac =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/nodebooter/configure.ac (revision 7784) +++ /ossiedev/branches/ssayed/devs/src/system/nodebooter/configure.ac (revision 8424) @@ -1,3 +1,3 @@ -AC_INIT(nodebooter, 0.6.2) +AC_INIT([nodebooter],[0.6.2]) AM_INIT_AUTOMAKE @@ -17,4 +17,6 @@ AC_CHECK_LIB([omniDynamic4], [main], [], [AC_MSG_ERROR([cannot find omniDynamic4 library])]) AC_CHECK_HEADERS([omniORB4/CORBA.h], [], [AC_MSG_ERROR([cannot find omniORB4 header files])]) +#AC_CHECK_LIB([], [main], [], [AC_MSG_ERROR([cannot find ossiecf library])]) +#AC_CHECK_HEADERS([ossie/cf.h], [], [AC_MSG_ERROR([cannot find cf header files])]) AC_LANG_POP Index: /ossiedev/branches/ssayed/devs/src/system/ossie/Doxyfile =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/ossie/Doxyfile (revision 2833) +++ /ossiedev/branches/ssayed/devs/src/system/ossie/Doxyfile (revision 8424) @@ -1,3 +1,3 @@ -# Doxyfile 1.3.6 +# Doxyfile 1.5.4 # This file describes the settings to be used by the documentation system @@ -15,8 +15,16 @@ #--------------------------------------------------------------------------- +# This tag specifies the encoding used for all characters in the config file that +# follow. The default is UTF-8 which is also the encoding used for all text before +# the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into +# libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of +# possible encodings. + +DOXYFILE_ENCODING = UTF-8 + # The PROJECT_NAME tag is a single word (or a sequence of words surrounded # by quotes) that should identify the project. -PROJECT_NAME = "OSSIE Framework" +PROJECT_NAME = "OSSIE Framework " # The PROJECT_NUMBER tag can be used to enter a project or revision number. @@ -31,5 +39,14 @@ # where doxygen was started. If left blank the current directory will be used. -OUTPUT_DIRECTORY = +OUTPUT_DIRECTORY = "documentation " + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all @@ -37,20 +54,11 @@ # information to generate all constant output in the proper language. # The default language is English, other supported languages are: -# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en -# (Japanese with English messages), Korean, Korean-en, Norwegian, Polish, Portuguese, -# Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian. +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian, +# Italian, Japanese, Japanese-en (Japanese with English messages), Korean, +# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, +# Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian. OUTPUT_LANGUAGE = English - -# This tag can be used to specify the encoding used in the generated output. -# The encoding is not always determined by the language that is chosen, -# but also whether or not the output is meant for Windows or non-Windows users. -# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES -# forces the Windows encoding (this is the default for the Windows binary), -# whereas setting the tag to NO uses a Unix-style encoding (the default for -# all platforms other than Windows). - -USE_WINDOWS_ENCODING = NO # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will @@ -71,9 +79,10 @@ # that is used to form the text in various listings. Each string # in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is used -# as the annotated text. Otherwise, the brief description is used as-is. If left -# blank, the following values are used ("$name" is automatically replaced with the -# name of the entity): "The $name class" "The $name widget" "The $name file" -# "is" "provides" "specifies" "contains" "represents" "a" "an" "the" +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" ABBREVIATE_BRIEF = @@ -85,8 +94,8 @@ ALWAYS_DETAILED_SEC = NO -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited -# members of a class in the documentation of that class as if those members were -# ordinary class members. Constructors, destructors and assignment operators of -# the base classes will not be shown. +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. INLINE_INHERITED_MEMB = YES @@ -101,9 +110,18 @@ # can be used to strip a user-defined part of the path. Stripping is # only done if one of the specified strings matches the left-hand part of -# the path. It is allowed to use relative paths in the argument list. +# the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the # path to strip. STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter @@ -116,8 +134,16 @@ # will interpret the first line (until the first dot) of a JavaDoc-style # comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like the Qt-style comments (thus requiring an -# explicit @brief command for a brief description. +# comments will behave just like regular Qt-style comments +# (thus requiring an explicit @brief command for a brief description.) JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring +# an explicit \brief command for a brief description.) + +QT_AUTOBRIEF = NO # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen @@ -142,10 +168,9 @@ INHERIT_DOCS = YES -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. - -DISTRIBUTE_GROUP_DOC = NO +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO # The TAB_SIZE tag can be used to set the number of spaces in a tab. @@ -163,6 +188,6 @@ ALIASES = -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources -# only. Doxygen will then generate output that is more tailored for C. +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. # For instance, some of the names that are used will be different. The list # of all members will be omitted, etc. @@ -170,10 +195,37 @@ OPTIMIZE_OUTPUT_FOR_C = NO -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources -# only. Doxygen will then generate output that is more tailored for Java. +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for Java. # For instance, namespaces will be presented as packages, qualified scopes # will look different, etc. OPTIMIZE_OUTPUT_JAVA = NO + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to +# include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO # Set the SUBGROUPING tag to YES (the default) to allow class member groups of @@ -185,4 +237,14 @@ SUBGROUPING = YES +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct (or union) is +# documented as struct with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code where the coding convention is that all structs are +# typedef'ed and only the typedef is referenced never the struct's name. + +TYPEDEF_HIDES_STRUCT = NO + #--------------------------------------------------------------------------- # Build related configuration options @@ -211,4 +273,18 @@ EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be extracted +# and appear in the documentation as a namespace called 'anonymous_namespace{file}', +# where file will be replaced with the base name of the file that contains the anonymous +# namespace. By default anonymous namespace are hidden. + +EXTRACT_ANON_NSPACES = NO # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all @@ -252,5 +328,5 @@ # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# users are advised to set this option to NO. +# and Mac users are advised to set this option to NO. CASE_SENSE_NAMES = YES @@ -342,4 +418,20 @@ SHOW_USED_FILES = YES +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is NO. + +SHOW_DIRECTORIES = NO + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from the +# version control system). Doxygen will invoke the program by executing (via +# popen()) the command , where is the value of +# the FILE_VERSION_FILTER tag, and is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + #--------------------------------------------------------------------------- # configuration options related to warning and progress messages @@ -370,10 +462,20 @@ WARN_IF_DOC_ERROR = YES +# This WARN_NO_PARAMDOC option can be abled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = NO + # The WARN_FORMAT tag determines the format of the warning messages that # doxygen can produce. The string should contain the $file, $line, and $text # tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. - -WARN_FORMAT = "$file:$line: $text" +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text " # The WARN_LOGFILE tag can be used to specify a file to which warning @@ -392,5 +494,15 @@ # with spaces. -INPUT = main_page.txt parser framework include/ossie +INPUT = main_page.txt \ + parser \ + framework \ + include/ossie + +# This tag can be used to specify the character encoding of the source files that +# doxygen parses. Internally doxygen uses the UTF-8 encoding, which is also the default +# input encoding. Doxygen uses libiconv (or the iconv built into libc) for the transcoding. +# See http://www.gnu.org/software/libiconv for the list of possible encodings. + +INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the @@ -398,6 +510,6 @@ # and *.h) to filter out the source-files in the directories. If left # blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp -# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx +# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 FILE_PATTERNS = @@ -415,6 +527,7 @@ EXCLUDE = -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories -# that are symbolic links (a Unix filesystem feature) are excluded from the input. +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix filesystem feature) are excluded +# from the input. EXCLUDE_SYMLINKS = NO @@ -422,7 +535,16 @@ # If the value of the INPUT tag contains directories, you can use the # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the output. +# The symbol name can be a fully qualified name, a word, or if the wildcard * is used, +# a substring. Examples: ANamespace, AClass, AClass::ANamespace, ANamespace::*Test + +EXCLUDE_SYMBOLS = # The EXAMPLE_PATH tag can be used to specify one or more files or @@ -457,7 +579,17 @@ # is the value of the INPUT_FILTER tag, and is the name of an # input file. Doxygen will then use the output that the filter program writes -# to standard output. +# to standard output. If FILTER_PATTERNS is specified, this tag will be +# ignored. INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +# is applied to all files. + +FILTER_PATTERNS = # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using @@ -474,5 +606,7 @@ # be generated. Documented entities will be cross-referenced with these sources. # Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. +# VERBATIM_HEADERS is set to NO. If you have enabled CALL_GRAPH or CALLER_GRAPH +# then you must also enable this option. If you don't then doxygen will produce +# a warning and turn it on anyway SOURCE_BROWSER = YES @@ -500,4 +634,19 @@ REFERENCES_RELATION = YES + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. Otherwise they will link to the documentstion. + +REFERENCES_LINK_SOURCE = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen @@ -585,4 +734,12 @@ GENERATE_HTMLHELP = NO +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. For this to work a browser that supports +# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox +# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). + +HTML_DYNAMIC_SECTIONS = NO + # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can # be used to specify the file name of the resulting .chm file. You @@ -887,5 +1044,5 @@ # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES # then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_PREDEFINED tags. +# PREDEFINED and EXPAND_AS_DEFINED tags. EXPAND_ONLY_PREDEF = NO @@ -913,5 +1070,7 @@ # gcc). The argument of the tag is a list of macros of the form: name # or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. PREDEFINED = @@ -927,6 +1086,6 @@ # doxygen's preprocessor will remove all function-like macros that are alone # on a line, have an all uppercase name, and do not end with a semicolon. Such -# function macros are typically used for boiler-plate code, and will confuse the -# parser if not removed. +# function macros are typically used for boiler-plate code, and will confuse +# the parser if not removed. SKIP_FUNCTION_MACROS = YES @@ -980,10 +1139,19 @@ # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or -# super classes. Setting the tag to NO turns the diagrams off. Note that this -# option is superseded by the HAVE_DOT option below. This is only a fallback. It is -# recommended to install and use dot, since it yields more powerful graphs. +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option is superseded by the HAVE_DOT option below. This is only a +# fallback. It is recommended to install and use dot, since it yields more +# powerful graphs. CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see http://www.mcternan.me.uk/mscgen/) to +# produce the chart and insert it in the documentation. The MSCGEN_PATH tag allows you to +# specify the directory where the mscgen tool resides. If left empty the tool is assumed to +# be found in the default search path. + +MSCGEN_PATH = # If set to YES, the inheritance and collaboration graphs will hide @@ -1014,4 +1182,9 @@ COLLABORATION_GRAPH = YES +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = YES + # If the UML_LOOK tag is set to YES doxygen will generate inheritance and # collaboration diagrams in a style similar to the OMG's Unified Modeling @@ -1039,5 +1212,5 @@ INCLUDED_BY_GRAPH = YES -# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will +# If the CALL_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will # generate a call dependency graph for every global function or class method. # Note that enabling this option will significantly increase the time of a run. @@ -1047,8 +1220,23 @@ CALL_GRAPH = YES +# If the CALLER_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will +# generate a caller dependency graph for every global function or class method. +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable caller graphs for selected +# functions only using the \callergraph command. + +CALLER_GRAPH = NO + # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen # will graphical hierarchy of all classes instead of a textual one. GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = YES # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images @@ -1059,5 +1247,5 @@ # The tag DOT_PATH can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found on the path. +# found. If left blank, it is assumed the dot tool can be found in the path. DOT_PATH = @@ -1069,30 +1257,38 @@ DOTFILE_DIRS = -# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width -# (in pixels) of the graphs generated by dot. If a graph becomes larger than -# this value, doxygen will try to truncate the graph, so that it fits within -# the specified constraint. Beware that most browsers cannot cope with very -# large images. - -MAX_DOT_GRAPH_WIDTH = 1024 - -# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height -# (in pixels) of the graphs generated by dot. If a graph becomes larger than -# this value, doxygen will try to truncate the graph, so that it fits within -# the specified constraint. Beware that most browsers cannot cope with very -# large images. - -MAX_DOT_GRAPH_HEIGHT = 1024 +# The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the number +# of direct children of the root node in a graph is already larger than +# MAX_DOT_GRAPH_NOTES then the graph will not be shown at all. Also note +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. + +DOT_GRAPH_MAX_NODES = 50 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the # graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes that -# lay further from the root node will be omitted. Note that setting this option to -# 1 or 2 may greatly reduce the computation time needed for large code bases. Also -# note that a graph may be further truncated if the graph's image dimensions are -# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT). -# If 0 is used for the depth value (the default), the graph is not depth-constrained. +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, which results in a white background. +# Warning: Depending on the platform used, enabling this option may lead to +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to +# read). + +DOT_TRANSPARENT = YES + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = NO # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will Index: /ossiedev/branches/ssayed/devs/src/system/ossie/configure.ac =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/ossie/configure.ac (revision 7809) +++ /ossiedev/branches/ssayed/devs/src/system/ossie/configure.ac (revision 8424) @@ -1,4 +1,4 @@ -AC_INIT(ossie, 0.6.2) -AC_PREREQ(2.59) +AC_INIT([ossie],[0.6.2]) +AC_PREREQ(2.61) AM_INIT_AUTOMAKE(nostdinc) @@ -13,7 +13,8 @@ AC_CHECK_LIB([omnithread], [main], [], [AC_MSG_ERROR([cannot find omnithread library])]) AC_CHECK_HEADERS([omniORB4/CORBA.h], [], [AC_MSG_ERROR([cannot find omniORB4 header files])]) -AC_CHECK_PROG([IDL], [omniidl], [omniidl], [AC_MSG_ERROR([cannot find omniidl prgram])]) +AC_CHECK_PROG([IDL], [omniidl], [AC_MSG_ERROR([cannot find omniidl program])]) AC_CHECK_HEADERS([boost/filesystem/operations.hpp], [], [AC_MSG_ERROR([boost filesystem library headers not installed.])]) + AC_CHECK_LIB([boost_filesystem], [main], [], [AC_MSG_ERROR([cannot find boost_filesystem library.])]) Index: /ossiedev/branches/ssayed/devs/src/system/ossie/idl/python/Makefile.am =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/ossie/idl/python/Makefile.am (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/ossie/idl/python/Makefile.am (revision 8424) @@ -0,0 +1,20 @@ +IDL_BIN = $(shell which omniidl) + +all : + $(IDL_BIN) -bpython -Wbpackage=ossie.cf ../cf.idl + $(IDL_BIN) -bpython -Wbpackage=ossie.cf ../StandardEvent.idl + $(IDL_BIN) -bpython -Wbpackage=ossie.cf ../PortTypes.idl + +install-data-local: + rm -rf $(DESTDIR)$(pythondir)/ossie/cf + mkdir -p $(DESTDIR)$(pythondir) + cp -R ossie $(DESTDIR)$(pythondir) + mkdir -p $(DESTDIR)/usr/lib/python2.5/site-packages + cp ossie.pth $(DESTDIR)/usr/lib/python2.5/site-packages + +distclean: + rm -rf ossie + +clean: + rm -rf ossie + Index: /ossiedev/branches/ssayed/devs/src/system/ossie/idl/python/ossie.pth =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/ossie/idl/python/ossie.pth (revision 5916) +++ /ossiedev/branches/ssayed/devs/src/system/ossie/idl/python/ossie.pth (revision 8424) @@ -22,3 +22,3 @@ # OSSIE tools -/sdr/tools +/usr/local/lib/python2.5/site-packages Index: /siedev/branches/ssayed/devs/src/system/ossie/idl/python/generatepythonbindings.py =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/ossie/idl/python/generatepythonbindings.py (revision 5737) +++ (revision ) @@ -1,13 +1,0 @@ -#! /usr/bin/env python - -import sys -import os - -idl_files = ['cf.idl', 'PortTypes.idl', 'StandardEvent.idl',] - -for f in idl_files: - cmd = 'omniidl -bpython -Wbpackage=ossie.cf ../' + f - print cmd - os.system(cmd) - - Index: /siedev/branches/ssayed/devs/src/system/ossie/idl/python/Makefile.in =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/ossie/idl/python/Makefile.in (revision 5784) +++ (revision ) @@ -1,14 +1,0 @@ -all: - python generatepythonbindings.py - -install: - python setup.py install - chmod -R 777 build - -distclean: - rm -rf ossie - rm -rf build - -clean: - rm -rf ossie - rm -rf build Index: /siedev/branches/ssayed/devs/src/system/ossie/idl/python/setup.py =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/ossie/idl/python/setup.py (revision 5916) +++ (revision ) @@ -1,42 +1,0 @@ -#! /usr/bin/env python - -from distutils.core import setup -import sys - -if len(sys.argv) != 2: - sys.exit(1) - -# Locate the /usr/lib/python2.X/site-packages directory -# from the sys module. This is used to install the ossie.pth -# file. -sitepackages_dir = \ - sys.prefix + \ - '/lib/python' + \ - str(sys.version_info[0]) + \ - '.' + \ - str(sys.version_info[1]) + \ - '/site-packages' - -# Generate a list of all the packages to include in the -# installation -packagename = 'cf' -subpackages = [ - 'CF', - 'PortTypes', - 'StandardEvent',] - -packagelist = ['ossie', 'ossie.'+packagename] -for s in subpackages: - packagelist.append('ossie.' + packagename + '.' + s) - packagelist.append('ossie.' + packagename + '.' + s + '__POA') - -# Run the setup -setup(name='ossie', - version='0.6.2', - author='OSSIE Team', - url='http://ossie.wireless.vt.edu/', - description='python bindings for the OSSIE core framework IDL', - packages=packagelist, - data_files=[(sitepackages_dir,['ossie.pth']),], - ) - Index: /ossiedev/branches/ssayed/devs/src/system/ossie/idl/cpp/Makefile.am =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/ossie/idl/cpp/Makefile.am (revision 5734) +++ /ossiedev/branches/ssayed/devs/src/system/ossie/idl/cpp/Makefile.am (revision 8424) @@ -1,4 +1,6 @@ +IDL_BIN = $(shell which omniidl) + %SK.cpp %.h %DynSK.cpp : ../%.idl - @IDL@ -bcxx -Wba -Wbd=DynSK.cpp -Wbh=.h -Wbs=SK.cpp $< + $(IDL_BIN) -bcxx -Wba -Wbd=DynSK.cpp -Wbh=.h -Wbs=SK.cpp $< cp $*.h ../../include/ossie Index: /ossiedev/branches/ssayed/devs/src/system/ossie/genDocs.py =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/ossie/genDocs.py (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/ossie/genDocs.py (revision 8424) @@ -0,0 +1,10 @@ +#!/usr/bin/env python + +import os + +if __name__ == "__main__": + print "generating documentation..." + + # run doxygen on default Doxyfile + os.system('doxygen Doxyfile') + Index: /ossiedev/branches/ssayed/devs/src/system/ossie/parser/prop_helpers.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/ossie/parser/prop_helpers.cpp (revision 7065) +++ /ossiedev/branches/ssayed/devs/src/system/ossie/parser/prop_helpers.cpp (revision 8424) @@ -23,5 +23,5 @@ #include #include - +#include #ifdef HAVE_OMNIORB4_CORBA_H #include "omniORB4/CORBA.h" Index: /ossiedev/branches/ssayed/devs/src/system/ossie/parser/orb_wrap.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/ossie/parser/orb_wrap.cpp (revision 7065) +++ /ossiedev/branches/ssayed/devs/src/system/ossie/parser/orb_wrap.cpp (revision 8424) @@ -30,5 +30,5 @@ #include #include - +#include #include Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/complexShortMD.idl =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/complexShortMD.idl (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/complexShortMD.idl (revision 8424) @@ -0,0 +1,41 @@ +/**************************************************************************** + +Copyright 2005,2006 Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Standard Interfaces. + +OSSIE Standard Interfaces are free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +OSSIE Standard Interfaces is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with OSSIE Standard Interfaces; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +****************************************************************************/ + + +#include "ossie/PortTypes.idl" +#include "RadioMetaData.idl" + +module standardInterfacesMD { + + interface complexShortMD { + void pushPacket( + in PortTypes::ShortSequence I, + in PortTypes::ShortSequence Q); + + void pushPacketMetaData( + in PortTypes::ShortSequence I, + in PortTypes::ShortSequence Q, + in MetaData packet_data); + }; + +}; Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/RadioMetaData.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/RadioMetaData.cpp (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/RadioMetaData.cpp (revision 8424) @@ -0,0 +1,86 @@ +/**************************************************************************** + +Copyright 2006, Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Core Framework. + +OSSIE Core Framework is free software; you can redistribute it and/or modify +it under the terms of the Lesser GNU General Public License as published by +the Free Software Foundation; either version 2.1 of the License, or +(at your option) any later version. + +OSSIE Core Framework is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +Lesser GNU General Public License for more details. + +You should have received a copy of the Lesser GNU General Public License +along with OSSIE Core Framework; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +****************************************************************************/ + +#include + +#include + +#include "standardinterfaces-metadata/RadioMetaData_impl.h" +#include "ossie/debug.h" + +namespace standardInterfacesMD { + +void InitializeMetaData( MetaData &m ) { + // initialize meta data + m.modulation_scheme.scheme = standardInterfacesMD::ModulationScheme::UNKNOWN; + m.modulation_scheme.M = 0; + m.packet_id = 0; + m.sampling_frequency = 0; + m.carrier_frequency = 0; + m.signal_bandwidth = 0; + m.signal_strength = 0; + m.eom = false; + m.src_id = 0; + m.dst_id = 0; + m.app_id = 0; + m.port_id = 0; + m.packet_type = 0; +} + +void PrintMetaData( MetaData &m ) { + switch (m.modulation_scheme.scheme) { + case standardInterfacesMD::ModulationScheme::UNKNOWN: + std::cout << " Modulation scheme: UNKNOWN" << std::endl; + break; + case standardInterfacesMD::ModulationScheme::PSK: + std::cout << " Modulation scheme: PSK" << std::endl; + break; + case standardInterfacesMD::ModulationScheme::DPSK: + std::cout << " Modulation scheme: Differential PSK" << std::endl; + break; + case standardInterfacesMD::ModulationScheme::FSK: + std::cout << " Modulation scheme: FSK" << std::endl; + break; + case standardInterfacesMD::ModulationScheme::QAM: + std::cout << " Modulation scheme: QAM" << std::endl; + break; + case standardInterfacesMD::ModulationScheme::PAM: + std::cout << " Modulation scheme: PAM" << std::endl; + break; + } + + std::cout << " Modulation depth: " << m.modulation_scheme.M << std::endl; + std::cout << " packet id: " << m.packet_id << std::endl; + std::cout << " sampling frequency: " << m.sampling_frequency << std::endl; + std::cout << " carrier frequency: " << m.carrier_frequency << std::endl; + std::cout << " signal bandwidth: " << m.signal_bandwidth << std::endl; + std::cout << " signal strength: " << m.signal_strength << std::endl; + std::cout << " end-of-message flag: " << m.eom << std::endl; + std::cout << " source id: " << m.src_id << std::endl; + std::cout << " destination id: " << m.dst_id << std::endl; + std::cout << " application id: " << m.app_id << std::endl; + std::cout << " port id: " << m.port_id << std::endl; + std::cout << " packet type: " << m.packet_type << std::endl; + +} + +} Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/python/Makefile.am =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/python/Makefile.am (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/python/Makefile.am (revision 8424) @@ -0,0 +1,17 @@ +IDL_BIN = $(shell which omniidl) + +all: + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfacesMD -Wbinline ../realCharMD.idl + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfacesMD -Wbinline ../complexShortMD.idl + +install-data-local: + rm -rf $(DESTDIR)$(pythondir)/ossie/standardinterfacesMD + mkdir -p $(DESTDIR)$(pythondir)/ossie/standardinterfacesMD + cp -R ossie/standardinterfacesMD $(DESTDIR)$(pythondir)/ossie + +distclean: + rm -rf ossie + +clean: + rm -rf ossie + Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/LICENSE =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/LICENSE (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/LICENSE (revision 8424) @@ -0,0 +1,340 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + , 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/standardInterfaces-metadata.pc =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/standardInterfaces-metadata.pc (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/standardInterfaces-metadata.pc (revision 8424) @@ -0,0 +1,10 @@ +prefix=/usr/local +includedir=${prefix}/include +libdir=${prefix}/lib + +Name: standardInterfaces-metadata +Description: Interface descriptions for OSSIE core framework components +Requires: +Version: 0.6.0 +Libs: -L${libdir} -lstandardInterfaces_metadata +Cflags: -I${includedir} Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/Doxyfile =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/Doxyfile (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/Doxyfile (revision 8424) @@ -0,0 +1,1228 @@ +# Doxyfile 1.4.4 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# by quotes) that should identify the project. + +PROJECT_NAME = "Standard Interfaces" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = documentation + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, +# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, +# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, +# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, +# Swedish, and Ukrainian. + +OUTPUT_LANGUAGE = English + +# This tag can be used to specify the encoding used in the generated output. +# The encoding is not always determined by the language that is chosen, +# but also whether or not the output is meant for Windows or non-Windows users. +# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES +# forces the Windows encoding (this is the default for the Windows binary), +# whereas setting the tag to NO uses a Unix-style encoding (the default for +# all platforms other than Windows). + +USE_WINDOWS_ENCODING = NO + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = YES + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like the Qt-style comments (thus requiring an +# explicit @brief command for a brief description. + +JAVADOC_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the DETAILS_AT_TOP tag is set to YES then Doxygen +# will output the detailed description near the top, like JavaDoc. +# If set to NO, the detailed description appears after the member +# documentation. + +DETAILS_AT_TOP = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = NO + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources +# only. Doxygen will then generate output that is more tailored for Java. +# For instance, namespaces will be presented as packages, qualified scopes +# will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = YES + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is YES. + +SHOW_DIRECTORIES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from the +# version control system). Doxygen will invoke the program by executing (via +# popen()) the command , where is the value of +# the FILE_VERSION_FILTER tag, and is the name of an input file +# provided by doxygen. Whatever the progam writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be abled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = NO + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = . documentation.txt include/standardinterfaces + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx +# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm + +FILE_PATTERNS = *.idl + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + +EXCLUDE = standardIdl.pp.idl RadioMetaData.osi.idl + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix filesystem feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = img + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command , where +# is the value of the INPUT_FILTER tag, and is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +# is applied to all files. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = YES + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES (the default) +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = YES + +# If the REFERENCES_RELATION tag is set to YES (the default) +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = NO + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# This tag can be used to set the number of enum values (range [1..20]) +# that doxygen will group on one line in the generated HTML documentation. + +ENUM_VALUES_PER_LINE = 4 + +# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be +# generated containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, +# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are +# probably better off using the HTML help feature. + +GENERATE_TREEVIEW = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = YES + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = NO + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_PREDEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# in the INCLUDE_PATH (see below) will be search if a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse +# the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option is superseded by the HAVE_DOT option below. This is only a +# fallback. It is recommended to install and use dot, since it yields more +# powerful graphs. + +CLASS_DIAGRAMS = YES + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = YES + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = YES + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will +# generate a call dependency graph for every global function or class method. +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are png, jpg, or gif +# If left blank png will be used. + +DOT_IMAGE_FORMAT = png + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very +# large images. + +MAX_DOT_GRAPH_WIDTH = 1024 + +# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very +# large images. + +MAX_DOT_GRAPH_HEIGHT = 1024 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that a graph may be further truncated if the graph's +# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH +# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), +# the graph is not depth-constrained. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, which results in a white background. +# Warning: Depending on the platform used, enabling this option may lead to +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to +# read). + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to the search engine +#--------------------------------------------------------------------------- + +# The SEARCHENGINE tag specifies whether or not a search engine should be +# used. If set to NO the values of all tags below this one will be ignored. + +SEARCHENGINE = NO Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/complexShortMD_u.h =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/complexShortMD_u.h (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/complexShortMD_u.h (revision 8424) @@ -0,0 +1,122 @@ +/**************************************************************************** + +Copyright 2006, Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Core Framework. + +OSSIE Core Framework is free software; you can redistribute it and/or modify +it under the terms of the Lesser GNU General Public License as published by +the Free Software Foundation; either version 2.1 of the License, or +(at your option) any later version. + +OSSIE Core Framework is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +Lesser GNU General Public License for more details. + +You should have received a copy of the Lesser GNU General Public License +along with OSSIE Core Framework; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +****************************************************************************/ + +#ifndef COMPLEXSHORT_U_H +#define COMPLEXSHORT_U_H + +#include +#include + +#ifdef HAVE_OMNIORB4 +#include "omniORB4/CORBA.h" +#endif + +#include + +#include +#include + +#include +#include "standardinterfaces-metadata/RadioMetaData_impl.h" + +// Forward declaration +namespace complexShort { + + class usesPort; + class ConnectionInfo; +} + +namespace standardInterfacesMD_i { + + class complexShort_u { + friend class complexShort::usesPort; + + public: + complexShort_u(const char* portName); + complexShort_u(const char* portName, const char* domainName); + ~complexShort_u(); + + CORBA::Object_ptr getPort(const char* portName); + + void pushPacket( + const PortTypes::ShortSequence &I, + const PortTypes::ShortSequence &Q); + + void pushPacket( + const PortTypes::ShortSequence &I, + const PortTypes::ShortSequence &Q, + const standardInterfacesMD::MetaData &packet_data); + + private: + complexShort_u(); + complexShort_u(const complexShort_u &); + + std::string portName; + + // Uses port + complexShort::usesPort *data_servant; + CF::Port_var data_servant_var; + std::vector dest_ports; + omni_mutex port_mutex; + + /// Data to be pushed for each packet + standardInterfacesMD::MetaData metadata; + + }; + +} + +namespace complexShort { + + class usesPort : public virtual POA_CF::Port { + public: + usesPort(standardInterfacesMD_i::complexShort_u *_base); + ~usesPort(); + + void connectPort(CORBA::Object_ptr connection, const char* connectionID); + void disconnectPort(const char* connectionID); + + private: + standardInterfacesMD_i::complexShort_u *base; + }; + + + class ConnectionInfo + { + public: + ConnectionInfo(standardInterfacesMD::complexShortMD_ptr _port, const char* _ID) : port_obj( _port), identifier(_ID) { }; + ConnectionInfo(const ConnectionInfo & c) { port_obj = c.port_obj; identifier = c.identifier;}; + + void setPort(standardInterfacesMD::complexShortMD_ptr _port) {port_obj = _port; }; + const char *getID() {return identifier.c_str(); }; + + standardInterfacesMD::complexShortMD_var port_obj; + + private: + ConnectionInfo(); // No default constructor + + std::string identifier; + }; + +} + +#endif Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/RadioMetaData_p.h =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/RadioMetaData_p.h (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/RadioMetaData_p.h (revision 8424) @@ -0,0 +1,90 @@ +/**************************************************************************** + +Copyright 2006, Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Core Framework. + +OSSIE Core Framework is free software; you can redistribute it and/or modify +it under the terms of the Lesser GNU General Public License as published by +the Free Software Foundation; either version 2.1 of the License, or +(at your option) any later version. + +OSSIE Core Framework is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +Lesser GNU General Public License for more details. + +You should have received a copy of the Lesser GNU General Public License +along with OSSIE Core Framework; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +****************************************************************************/ + +#ifndef RADIOMETADATA_P_H +#define RADIOMETADATA_P_H + +#include +#include + +#include +#include "standardinterfaces-metadata/RadioMetaData_impl.h" + +namespace RadioMetaData { + class providesPort; +} + +namespace standardInterfacesMD_i { + class RadioMetaData_p { + friend class RadioMetaData::providesPort; + + public: + RadioMetaData_p(const char* portName, unsigned int bufLen = 5); + RadioMetaData_p(const char* portName, const char* domainName, unsigned int bufLen = 5); + ~RadioMetaData_p(); + + CORBA::Object_ptr getPort(const char* portName); + + void getMetaData(standardInterfacesMD::MetaData* &packet_data); + + void bufferEmptied() { ready_for_input->post(); }; + + private: + RadioMetaData_p(); + RadioMetaData_p(const RadioMetaData_p &); + + std::string portName; + + // Provides port + RadioMetaData::providesPort *data_servant; + standardInterfacesMD::RadioMetaData_var data_servant_var; + + // Buffer storage + unsigned int bufferLength; + unsigned int rdPtr; + unsigned int wrPtr; + std::vector metadata_buf; + + // Semaphores for synchronization + omni_semaphore *data_ready; // Ready to process data + omni_semaphore *ready_for_input; // Ready to receive more data + + }; + +} + +namespace RadioMetaData { + + class providesPort : public POA_standardInterfacesMD::RadioMetaData { + public: + providesPort(standardInterfacesMD_i::RadioMetaData_p* _base); + ~providesPort(); + + void pushMetaData(const standardInterfacesMD::MetaData &packet_data); + + private: + standardInterfacesMD_i::RadioMetaData_p* base; + }; +} + + +#endif Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/RadioMetaData_impl.h =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/RadioMetaData_impl.h (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/RadioMetaData_impl.h (revision 8424) @@ -0,0 +1,41 @@ +/**************************************************************************** + +Copyright 2006, Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Core Framework. + +OSSIE Core Framework is free software; you can redistribute it and/or modify +it under the terms of the Lesser GNU General Public License as published by +the Free Software Foundation; either version 2.1 of the License, or +(at your option) any later version. + +OSSIE Core Framework is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +Lesser GNU General Public License for more details. + +You should have received a copy of the Lesser GNU General Public License +along with OSSIE Core Framework; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +****************************************************************************/ + +#ifndef __RADIOMETADATA_IMPL_H__ +#define __RADIOMETADATA_IMPL_H__ + +#include +#include + +#include "standardinterfaces-metadata/RadioMetaData.h" + +namespace standardInterfacesMD { + +/// \brief Initialize a MetaData CORBA object +void InitializeMetaData( MetaData &m ); + +/// \brief Print MetaData information to screen +void PrintMetaData( MetaData &m ); + +} + +#endif Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/realCharMD_p.h =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/realCharMD_p.h (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/realCharMD_p.h (revision 8424) @@ -0,0 +1,104 @@ +/**************************************************************************** + +Copyright 2006, Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Core Framework. + +OSSIE Core Framework is free software; you can redistribute it and/or modify +it under the terms of the Lesser GNU General Public License as published by +the Free Software Foundation; either version 2.1 of the License, or +(at your option) any later version. + +OSSIE Core Framework is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +Lesser GNU General Public License for more details. + +You should have received a copy of the Lesser GNU General Public License +along with OSSIE Core Framework; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +****************************************************************************/ + +#ifndef REALCHAR_P_H +#define REALCHAR_P_H + +#include +#include + +#include +#include "standardinterfaces-metadata/RadioMetaData_impl.h" + +namespace realChar { + class providesPort; +} + +namespace standardInterfacesMD_i { + class realChar_p { + friend class realChar::providesPort; + + public: + realChar_p(const char* portName, unsigned int bufLen = 5); + ~realChar_p(); + + CORBA::Object_ptr getPort(const char* portName); + + void getData( + PortTypes::CharSequence* &I); + + void getData( + PortTypes::CharSequence* &I, + standardInterfacesMD::MetaData* &packet_data); + + void bufferEmptied(); + + private: + realChar_p(); + realChar_p(const realChar_p &); + + std::string portName; + + // Provides port + realChar::providesPort *data_servant; + standardInterfacesMD::realCharMD_var data_servant_var; + + // Buffer storage + unsigned int bufferLength; + unsigned int rdPtr; + unsigned int wrPtr; + std::vector I_buf; + std::vector metadata_buf; + + // Semaphores for synchronization + omni_semaphore *data_ready; // Ready to process data + omni_semaphore *ready_for_input; // Ready to receive more data + + // packet meta data + standardInterfacesMD::MetaData metadata; + + + + }; + +} + +namespace realChar { + + class providesPort : public POA_standardInterfacesMD::realCharMD { + public: + providesPort(standardInterfacesMD_i::realChar_p* _base); + ~providesPort(); + + void pushPacket(const PortTypes::CharSequence &I); + + void pushPacketMetaData( + const PortTypes::CharSequence &I, + const standardInterfacesMD::MetaData &packet_data); + + private: + standardInterfacesMD_i::realChar_p* base; + }; +} + + +#endif Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/Makefile.am =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/Makefile.am (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/Makefile.am (revision 8424) @@ -0,0 +1,7 @@ + +pkginclude_HEADERS = \ + realCharMD_u.h realCharMD_p.h \ + complexShortMD_u.h complexShortMD_p.h \ + RadioMetaData_impl.h \ + RadioMetaData_u.h RadioMetaData_p.h + Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/RadioMetaData_u.h =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/RadioMetaData_u.h (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/RadioMetaData_u.h (revision 8424) @@ -0,0 +1,114 @@ +/**************************************************************************** + +Copyright 2006, Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Core Framework. + +OSSIE Core Framework is free software; you can redistribute it and/or modify +it under the terms of the Lesser GNU General Public License as published by +the Free Software Foundation; either version 2.1 of the License, or +(at your option) any later version. + +OSSIE Core Framework is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +Lesser GNU General Public License for more details. + +You should have received a copy of the Lesser GNU General Public License +along with OSSIE Core Framework; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +****************************************************************************/ + +#ifndef RADIOMETADATA_U_H +#define RADIOMETADATA_U_H + +#include +#include + +#ifdef HAVE_OMNIORB4 +#include "omniORB4/CORBA.h" +#endif + +#include + +#include +#include + +#include "standardinterfaces-metadata/RadioMetaData.h" + +// Forward declaration +namespace RadioMetaData { + + class usesPort; + class ConnectionInfo; +} + +namespace standardInterfacesMD_i { + + class RadioMetaData_u { + friend class RadioMetaData::usesPort; + + public: + RadioMetaData_u(const char* portName); + RadioMetaData_u(const char* portName, const char* domainName); + ~RadioMetaData_u(); + + CORBA::Object_ptr getPort(const char* portName); + + void pushMetaData(const standardInterfacesMD::MetaData &packet_data); + + private: + /// Disallow default constructor + RadioMetaData_u(); + + /// Disallow copy constructor + RadioMetaData_u(const RadioMetaData_u &); + + std::string portName; + + // Uses port + RadioMetaData::usesPort *data_servant; + CF::Port_var data_servant_var; + std::vector dest_ports; + omni_mutex port_mutex; + + }; + +} + +namespace RadioMetaData { + + class usesPort : public virtual POA_CF::Port { + public: + usesPort(standardInterfacesMD_i::RadioMetaData_u *_base); + ~usesPort(); + + void connectPort(CORBA::Object_ptr connection, const char* connectionID); + void disconnectPort(const char* connectionID); + + private: + standardInterfacesMD_i::RadioMetaData_u *base; + }; + + + class ConnectionInfo + { + public: + ConnectionInfo(standardInterfacesMD::RadioMetaData_ptr _port, const char* _ID) : port_obj( _port), identifier(_ID) { }; + ConnectionInfo(const ConnectionInfo & c) { port_obj = c.port_obj; identifier = c.identifier;}; + + void setPort(standardInterfacesMD::RadioMetaData_ptr _port) {port_obj = _port; }; + const char *getID() {return identifier.c_str(); }; + + standardInterfacesMD::RadioMetaData_var port_obj; + + private: + ConnectionInfo(); // No default constructor + + std::string identifier; + }; + +} + +#endif Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/realCharMD_u.h =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/realCharMD_u.h (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/realCharMD_u.h (revision 8424) @@ -0,0 +1,119 @@ +/**************************************************************************** + +Copyright 2006, Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Core Framework. + +OSSIE Core Framework is free software; you can redistribute it and/or modify +it under the terms of the Lesser GNU General Public License as published by +the Free Software Foundation; either version 2.1 of the License, or +(at your option) any later version. + +OSSIE Core Framework is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +Lesser GNU General Public License for more details. + +You should have received a copy of the Lesser GNU General Public License +along with OSSIE Core Framework; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +****************************************************************************/ + +#ifndef REALCHAR_U_H +#define REALCHAR_U_H + +#include +#include + +#ifdef HAVE_OMNIORB4 +#include "omniORB4/CORBA.h" +#endif + +#include + +#include +#include + +#include +#include "standardinterfaces-metadata/RadioMetaData_impl.h" + +// Forward declaration +namespace realChar { + + class usesPort; + class ConnectionInfo; +} + +namespace standardInterfacesMD_i { + + class realChar_u { + friend class realChar::usesPort; + + public: + realChar_u(const char* portName); + realChar_u(const char* portName, const char* domainName); + ~realChar_u(); + + CORBA::Object_ptr getPort(const char* portName); + + void pushPacket(const PortTypes::CharSequence &I); + + void pushPacket( + const PortTypes::CharSequence &I, + const standardInterfacesMD::MetaData &packet_data); + + private: + realChar_u(); + realChar_u(const realChar_u &); + + std::string portName; + + // Uses port + realChar::usesPort *data_servant; + CF::Port_var data_servant_var; + std::vector dest_ports; + omni_mutex port_mutex; + + /// Data to be pushed for each packet + standardInterfacesMD::MetaData metadata; + + }; + +} + +namespace realChar { + + class usesPort : public virtual POA_CF::Port { + public: + usesPort(standardInterfacesMD_i::realChar_u *_base); + ~usesPort(); + + void connectPort(CORBA::Object_ptr connection, const char* connectionID); + void disconnectPort(const char* connectionID); + + private: + standardInterfacesMD_i::realChar_u *base; + }; + + + class ConnectionInfo + { + public: + ConnectionInfo(standardInterfacesMD::realCharMD_ptr _port, const char* _ID) : port_obj( _port), identifier(_ID) { }; + ConnectionInfo(const ConnectionInfo & c) { port_obj = c.port_obj; identifier = c.identifier;}; + + void setPort(standardInterfacesMD::realCharMD_ptr _port) {port_obj = _port; }; + const char *getID() {return identifier.c_str(); }; + + standardInterfacesMD::realCharMD_var port_obj; + + private: + ConnectionInfo(); // No default constructor + + std::string identifier; + }; + +} + +#endif Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/complexShortMD_p.h =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/complexShortMD_p.h (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/standardinterfaces-metadata/complexShortMD_p.h (revision 8424) @@ -0,0 +1,109 @@ +/**************************************************************************** + +Copyright 2006, Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Core Framework. + +OSSIE Core Framework is free software; you can redistribute it and/or modify +it under the terms of the Lesser GNU General Public License as published by +the Free Software Foundation; either version 2.1 of the License, or +(at your option) any later version. + +OSSIE Core Framework is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +Lesser GNU General Public License for more details. + +You should have received a copy of the Lesser GNU General Public License +along with OSSIE Core Framework; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +****************************************************************************/ + +#ifndef COMPLEXSHORT_P_H +#define COMPLEXSHORT_P_H + +#include +#include + +#include +#include "standardinterfaces-metadata/RadioMetaData_impl.h" + +namespace complexShort { + class providesPort; +} + +namespace standardInterfacesMD_i { + class complexShort_p { + friend class complexShort::providesPort; + + public: + complexShort_p(const char* portName, unsigned int bufLen = 5); + complexShort_p(const char* portName, const char* domainName, unsigned int bufLen = 5); + ~complexShort_p(); + + CORBA::Object_ptr getPort(const char* portName); + + void getData( + PortTypes::ShortSequence* &I, + PortTypes::ShortSequence* &Q); + + void getData( + PortTypes::ShortSequence* &I, + PortTypes::ShortSequence* &Q, + standardInterfacesMD::MetaData* &packet_data); + + void bufferEmptied(); + + private: + complexShort_p(); + complexShort_p(const complexShort_p &); + + std::string portName; + + // Provides port + complexShort::providesPort *data_servant; + standardInterfacesMD::complexShortMD_var data_servant_var; + + // Buffer storage + unsigned int bufferLength; + unsigned int rdPtr; + unsigned int wrPtr; + std::vector I_buf; + std::vector Q_buf; + std::vector metadata_buf; + + // Semaphores for synchronization + omni_semaphore *data_ready; // Ready to process data + omni_semaphore *ready_for_input; // Ready to receive more data + + // packet meta data + standardInterfacesMD::MetaData metadata; + + }; + +} + +namespace complexShort { + + class providesPort : public POA_standardInterfacesMD::complexShortMD { + public: + providesPort(standardInterfacesMD_i::complexShort_p* _base); + ~providesPort(); + + void pushPacket( + const PortTypes::ShortSequence &I, + const PortTypes::ShortSequence &Q); + + void pushPacketMetaData( + const PortTypes::ShortSequence &I, + const PortTypes::ShortSequence &Q, + const standardInterfacesMD::MetaData &packet_data); + + private: + standardInterfacesMD_i::complexShort_p* base; + }; +} + + +#endif Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/Makefile.am =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/Makefile.am (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/include/Makefile.am (revision 8424) @@ -0,0 +1,2 @@ +SUBDIRS = standardinterfaces-metadata + Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/documentation.txt =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/documentation.txt (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/documentation.txt (revision 8424) @@ -0,0 +1,136 @@ +/**************************************************************************** + +Copyright 2007 Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Standard Interfaces. + +OSSIE Standard Interfaces is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +OSSIE Standard Interfaces is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with OSSIE Standard Interfaces; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +****************************************************************************/ + +/*! \mainpage Standard Interfaces + +\section description Basic description +The StandardInterfaces library assists in rapid component development by +providing a list of common interfaces for radio development. The interfaces +are written in the Interface Description Language (IDL), and the port +implementations are implemented in C++. Python bindings are also available. + +\subsection cppexample C++ Code Example + +\code +// MyComponent.h + +#include "standardinterfaces/complexShort_u.h" +#include "standardinterfaces/realChar_p.h" + +class MyComponent_i : public virtual Resource_impl +{ + public: + // ... + + private: + // list components provides and uses ports + standardInterfaces_i::realChar_p *bitsInPort; + standardInterfaces_i::complexShort_u *symbolsOutPort; + standardInterfaces::MetaData *metadata; +}; +\endcode + +And here is an example of the resulting source file + +\code +// MyComponent.cpp + +// Constructor +MyComponent_i::MyComponent_i() { + // Create the ports + bitsInPort = new standardInterfaces_i::realChar_p("bitsIn"); + symbolsOutPort = new standardInterfaces_i::complexShort_u("symbolsOut"); +} + +// Worker method +void MyComponent_i::ProcessData() +{ + PortTypes::CharSequence * bits_in; + PortTypes::ShortSequence I_out, Q_out; + + while (continue_processing) { + // Get data from port + bitsInPort->getData(bits_in, metadata); + + // Process data here... + unsigned int N = bits_in->length(); + I_out.length(N); + Q_out.length(N); + for (unsigned int i=0; ibufferEmptied(); + + // Push output data + symbolsOutPort->(I_out, Q_out, *metadata); +} +\endcode + +Note that the MetaData object is optional. If the component does not use the +MetaData interface the components would invoke the pushPacket() and getData() +methods without the last argument. The figure below depicts the flow of data +through the ports between components. + +\image latex example_complexShortMetaData.eps "complexShort interface with MetaData" width=0.9\textwidth +\image html example_complexShortMetaData.png "complexShort interface with MetaData" + +\section radiometadata Radio Meta Data +The table below describes the meta data associated with each CORBA packet. + + + + + + + + + + +
NameDescriptionType/Range
mod_scheme Scheme used to modulate the data UNKNOWN, PSK, DPSK, PAM, FSK, QAM
M Number of symbols in mod_scheme constellation unsigned long int
sampling_frequency Frequency (Hz) at which the data are sampled float
carrier_frequency Frequency (Hz) for which the signal is modulated float
signal_bandwidth Bandwidth (Hz) of the signal float
signal_strength Nominal strength of signal (dB) float
eom End-of-message flag boolean
+ +\section installation Installation + +\verbatim +$ ./reconf +$ ./configure +$ make +# make install +\endverbatim + +If installing the libraries for the first time you will also need to link the +libraries by running the following command with root permissions +\verbatim +# /sbin/ldconfig +\endverbatim + +\subsection dependencies Software Build Dependencies + +\section usage Usage + +\section status Status and History + +\section references References +*/ + Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/standardInterfaces-metadata.pc.in =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/standardInterfaces-metadata.pc.in (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/standardInterfaces-metadata.pc.in (revision 8424) @@ -0,0 +1,10 @@ +prefix=@prefix@ +includedir=${prefix}/include +libdir=${prefix}/lib + +Name: standardInterfaces-metadata +Description: Interface descriptions for OSSIE core framework components +Requires: +Version: @VERSION@ +Libs: -L${libdir} -lstandardInterfaces_metadata +Cflags: -I${includedir} Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/ltmain.sh =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/ltmain.sh (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/ltmain.sh (revision 8424) @@ -0,0 +1,6425 @@ +# ltmain.sh - Provide generalized library-building support services. +# NOTE: Changing this file will not affect anything until you rerun configure. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004 +# Free Software Foundation, Inc. +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +basename="s,^.*/,,g" + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + +# RH: define SED for historic ltconfig's generated by Libtool 1.3 +[ -z "$SED" ] && SED=sed + +# The name of this program: +progname=`echo "$progpath" | $SED $basename` +modename="$progname" + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 + +PROGRAM=ltmain.sh +PACKAGE=libtool +VERSION=1.5.6 +TIMESTAMP=" (1.1220.2.95 2004/04/11 05:50:42)" + + +# Check that we have a working $echo. +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell, and then maybe $echo will work. + exec $SHELL "$progpath" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE +fi + +# Global variables. +mode=$default_mode +nonopt= +prev= +prevopt= +run= +show="$echo" +show_help= +execute_dlfiles= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" + +##################################### +# Shell function definitions: +# This seems to be the best place for them + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +func_win32_libid () { + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ + $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | \ + sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'` + if test "X$win32_nmres" = "Ximport" ; then + win32_libid_type="x86 archive import" + else + win32_libid_type="x86 archive static" + fi + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $echo $win32_libid_type +} + + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () { + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + CC_quoted="$CC_quoted $arg" + done + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + CC_quoted="$CC_quoted $arg" + done + case "$@ " in + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + $echo "$modename: unable to infer tagged configuration" + $echo "$modename: specify a tag with \`--tag'" 1>&2 + exit $EXIT_FAILURE +# else +# $echo "$modename: using $tagname tagged configuration" + fi + ;; + esac + fi +} +# End of Shell function definitions +##################################### + +# Darwin sucks +eval std_shrext=\"$shrext_cmds\" + +# Parse our command line options once, thoroughly. +while test "$#" -gt 0 +do + arg="$1" + shift + + case $arg in + -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; + *) optarg= ;; + esac + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + execute_dlfiles) + execute_dlfiles="$execute_dlfiles $arg" + ;; + tag) + tagname="$arg" + preserve_args="${preserve_args}=$arg" + + # Check whether tagname contains only valid characters + case $tagname in + *[!-_A-Za-z0-9,/]*) + $echo "$progname: invalid tag name: $tagname" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + case $tagname in + CC) + # Don't test for the "default" C tag, as we know, it's there, but + # not specially marked. + ;; + *) + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then + taglist="$taglist $tagname" + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" + else + $echo "$progname: ignoring unknown tag $tagname" 1>&2 + fi + ;; + esac + ;; + *) + eval "$prev=\$arg" + ;; + esac + + prev= + prevopt= + continue + fi + + # Have we seen a non-optional argument yet? + case $arg in + --help) + show_help=yes + ;; + + --version) + $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" + $echo + $echo "Copyright (C) 2003 Free Software Foundation, Inc." + $echo "This is free software; see the source for copying conditions. There is NO" + $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + exit $EXIT_SUCCESS + ;; + + --config) + ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath + # Now print the configurations for the tags. + for tagname in $taglist; do + ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" + done + exit $EXIT_SUCCESS + ;; + + --debug) + $echo "$progname: enabling shell trace mode" + set -x + preserve_args="$preserve_args $arg" + ;; + + --dry-run | -n) + run=: + ;; + + --features) + $echo "host: $host" + if test "$build_libtool_libs" = yes; then + $echo "enable shared libraries" + else + $echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + $echo "enable static libraries" + else + $echo "disable static libraries" + fi + exit $EXIT_SUCCESS + ;; + + --finish) mode="finish" ;; + + --mode) prevopt="--mode" prev=mode ;; + --mode=*) mode="$optarg" ;; + + --preserve-dup-deps) duplicate_deps="yes" ;; + + --quiet | --silent) + show=: + preserve_args="$preserve_args $arg" + ;; + + --tag) prevopt="--tag" prev=tag ;; + --tag=*) + set tag "$optarg" ${1+"$@"} + shift + prev=tag + preserve_args="$preserve_args --tag" + ;; + + -dlopen) + prevopt="-dlopen" + prev=execute_dlfiles + ;; + + -*) + $echo "$modename: unrecognized option \`$arg'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + + *) + nonopt="$arg" + break + ;; + esac +done + +if test -n "$prevopt"; then + $echo "$modename: option \`$prevopt' requires an argument" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE +fi + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +if test -z "$show_help"; then + + # Infer the operation mode. + if test -z "$mode"; then + $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 + $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2 + case $nonopt in + *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) + mode=link + for arg + do + case $arg in + -c) + mode=compile + break + ;; + esac + done + ;; + *db | *dbx | *strace | *truss) + mode=execute + ;; + *install*|cp|mv) + mode=install + ;; + *rm) + mode=uninstall + ;; + *) + # If we have no mode, but dlfiles were specified, then do execute mode. + test -n "$execute_dlfiles" && mode=execute + + # Just use the default operation mode. + if test -z "$mode"; then + if test -n "$nonopt"; then + $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 + else + $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 + fi + fi + ;; + esac + fi + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + $echo "$modename: unrecognized option \`-dlopen'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$modename --help --mode=$mode' for more information." + + # These modes are in order of execution frequency so that they run quickly. + case $mode in + # libtool compile mode + compile) + modename="$modename: compile" + # Get the compilation command and the source file. + base_compile= + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_opt=yes + suppress_output= + arg_mode=normal + libobj= + later= + + for arg + do + case "$arg_mode" in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal + ;; + + target ) + libobj="$arg" + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + if test -n "$libobj" ; then + $echo "$modename: you cannot specify \`-o' more than once" 1>&2 + exit $EXIT_FAILURE + fi + arg_mode=target + continue + ;; + + -static | -prefer-pic | -prefer-non-pic) + later="$later $arg" + continue + ;; + + -no-suppress) + suppress_opt=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + lastarg="$lastarg $arg" + done + IFS="$save_ifs" + lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + + # Add the arguments to base_compile. + base_compile="$base_compile $lastarg" + continue + ;; + + * ) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` + + case $lastarg in + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + lastarg="\"$lastarg\"" + ;; + esac + + base_compile="$base_compile $lastarg" + done # for arg + + case $arg_mode in + arg) + $echo "$modename: you must specify an argument for -Xcompile" + exit $EXIT_FAILURE + ;; + target) + $echo "$modename: you must specify a target with \`-o'" 1>&2 + exit $EXIT_FAILURE + ;; + *) + # Get the name of the library object. + [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + xform='[cCFSifmso]' + case $libobj in + *.ada) xform=ada ;; + *.adb) xform=adb ;; + *.ads) xform=ads ;; + *.asm) xform=asm ;; + *.c++) xform=c++ ;; + *.cc) xform=cc ;; + *.ii) xform=ii ;; + *.class) xform=class ;; + *.cpp) xform=cpp ;; + *.cxx) xform=cxx ;; + *.f90) xform=f90 ;; + *.for) xform=for ;; + *.java) xform=java ;; + esac + + libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` + + case $libobj in + *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; + *) + $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -static) + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then + xdir= + else + xdir=$xdir/ + fi + lobj=${xdir}$objdir/$objname + + if test -z "$base_compile"; then + $echo "$modename: you must specify a compilation command" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + $run $rm $removelist + trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + removelist="$removelist $output_obj $lockfile" + trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $run ln "$progpath" "$lockfile" 2>/dev/null; do + $show "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $echo "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit $EXIT_FAILURE + fi + $echo $srcfile > "$lockfile" + fi + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi + + $run $rm "$libobj" "${libobj}T" + + # Create a libtool object file (analogous to a ".la" file), + # but don't create it if we're doing a dry run. + test -z "$run" && cat > ${libobj}T </dev/null`" != "X$srcfile"; then + $echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + $show "$mv $output_obj $lobj" + if $run $mv $output_obj $lobj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Append the name of the PIC object to the libtool object file. + test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != "X$srcfile"; then + $echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + $show "$mv $output_obj $obj" + if $run $mv $output_obj $obj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Append the name of the non-PIC object the libtool object file. + # Only append if the libtool object file exists. + test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + else + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + fi + build_libtool_libs=no + build_old_libs=yes + prefer_static_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test + ;; + *) qarg=$arg ;; + esac + libtool_args="$libtool_args $qarg" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + compile_command="$compile_command @OUTPUT@" + finalize_command="$finalize_command @OUTPUT@" + ;; + esac + + case $prev in + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + compile_command="$compile_command @SYMFILE@" + finalize_command="$finalize_command @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + else + dlprefiles="$dlprefiles $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + if test ! -f "$arg"; then + $echo "$modename: symbol file \`$arg' does not exist" + exit $EXIT_FAILURE + fi + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat $save_arg` + do +# moreargs="$moreargs $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit $EXIT_FAILURE + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit $EXIT_FAILURE + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + fi + done + else + $echo "$modename: link input file \`$save_arg' does not exist" + exit $EXIT_FAILURE + fi + arg=$save_arg + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit $EXIT_FAILURE + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) rpath="$rpath $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) xrpath="$xrpath $arg" ;; + esac + fi + prev= + continue + ;; + xcompiler) + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" + prev= + compile_command="$compile_command $wl$qarg" + finalize_command="$finalize_command $wl$qarg" + continue + ;; + xcclinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + compile_command="$compile_command $link_static_flag" + finalize_command="$finalize_command $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 + continue + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: more than one -exported-symbols argument is not allowed" + exit $EXIT_FAILURE + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + ;; + esac + continue + ;; + + -L*) + dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 + exit $EXIT_FAILURE + fi + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "*) ;; + *) + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + case :$dllsearchpath: in + *":$dir:"*) ;; + *) dllsearchpath="$dllsearchpath:$dir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-pw32* | *-*-beos*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-mingw* | *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + deplibs="$deplibs -framework System" + continue + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + deplibs="$deplibs $arg" + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + deplibs="$deplibs $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # gcc -m* arguments should be passed to the linker via $compiler_flags + # in order to pass architecture information to the linker + # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo + # but this is not reliable with gcc because gcc may use -mfoo to + # select a different linker, different libraries, etc, while + # -Wl,-mfoo simply passes -mfoo to the linker. + -m*) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + if test "$with_gcc" = "yes" ; then + compiler_flags="$compiler_flags $arg" + fi + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + # The PATH hackery in wrapper scripts is required on Windows + # in order for the loader to find any dlls it needs. + $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 + $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit $EXIT_FAILURE + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + continue + ;; + + -static) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Wl,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $wl$flag" + linker_flags="$linker_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # Some other compiler flag. + -* | +*) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + ;; + + *.$objext) + # A standard object. + objs="$objs $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit $EXIT_FAILURE + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit $EXIT_FAILURE + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + fi + ;; + + *.$libext) + # An archive. + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + dlfiles="$dlfiles $arg" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + dlprefiles="$dlprefiles $arg" + prev= + else + deplibs="$deplibs $arg" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + done # argument parsing loop + + if test -n "$prev"; then + $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` + if test "X$output_objdir" = "X$output"; then + output_objdir="$objdir" + else + output_objdir="$output_objdir/$objdir" + fi + # Create the object directory. + if test ! -d "$output_objdir"; then + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir + status=$? + if test "$status" -ne 0 && test ! -d "$output_objdir"; then + exit $status + fi + fi + + # Determine the type of output + case $output in + "") + $echo "$modename: you must specify an output file" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + case $host in + *cygwin* | *mingw* | *pw32*) + # don't eliminate duplications in $postdeps and $predeps + duplicate_compiler_generated_deps=yes + ;; + *) + duplicate_compiler_generated_deps=$duplicate_deps + ;; + esac + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if test "X$duplicate_deps" = "Xyes" ; then + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + libs="$libs $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + esac + pre_post_deps="$pre_post_deps $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + case $linkmode in + lib) + passes="conv link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 + exit $EXIT_FAILURE + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + for pass in $passes; do + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 + continue + fi + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` + for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if (${SED} -e '2q' $lib | + grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + library_names= + old_library= + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + *) + $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) lib="$deplib" ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + if test "$deplibs_check_method" != pass_all; then + $echo + $echo "*** Warning: Trying to link with static lib archive $deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because the file extensions .$libext of this argument makes me believe" + $echo "*** that it is just a static archive that I should not used here." + else + $echo + $echo "*** Warning: Linking the shared library $output against the" + $echo "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + if test "$found" = yes || test -f "$lib"; then : + else + $echo "$modename: cannot find the library \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + + # Read the .la file + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + elif test "$linkmode" != prog && test "$linkmode" != lib; then + $echo "$modename: \`$lib' is not a convenience library" 1>&2 + exit $EXIT_FAILURE + fi + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + if test -z "$linklib"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + dlprefiles="$dlprefiles $lib $dependency_libs" + else + newdlfiles="$newdlfiles $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 + $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 + abs_ladir="$ladir" + fi + ;; + esac + laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + $echo "$modename: warning: library \`$lib' was moved." 1>&2 + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$libdir" + absdir="$libdir" + fi + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi # $installed = yes + name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var"; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *" $absdir "*) ;; + *) temp_rpath="$temp_rpath $dir" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + # This is a shared library + + # Warn about portability, can't link against -module's on + # some systems (darwin) + if test "$shouldnotlink" = yes && test "$pass" = link ; then + $echo + if test "$linkmode" = prog; then + $echo "*** Warning: Linking the executable $output against the loadable module" + else + $echo "*** Warning: Linking the shared library $output against the loadable module" + fi + $echo "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + realname="$2" + shift; shift + libname=`eval \\$echo \"$libname_spec\"` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw*) + major=`expr $current - $age` + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + soname=`$echo $soroot | ${SED} -e 's/^.*\///'` + newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + $show "extracting exported symbol list from \`$soname'" + save_ifs="$IFS"; IFS='~' + cmds=$extract_expsyms_cmds + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + $show "generating import library for \`$soname'" + save_ifs="$IFS"; IFS='~' + cmds=$old_archive_from_expsyms_cmds + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5* ) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a module then we can not link against + # it, someone is ignoring the new warnings I added + if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then + $echo "** Warning, lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + $echo + $echo "** And there doesn't seem to be a static archive available" + $echo "** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case "$libdir" in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + $echo "$modename: configuration error: unsupported hardcode properties" + exit $EXIT_FAILURE + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && \ + test "$hardcode_minus_L" != yes && \ + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case "$libdir" in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + $echo + $echo "*** Warning: This system can not link to static lib archive $lib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + $echo "*** But as you try to build a module library, libtool will still create " + $echo "*** a static module, that should work as long as the dlopening application" + $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + convenience="$convenience $dir/$old_library" + old_convenience="$old_convenience $dir/$old_library" + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + *) temp_deplibs="$temp_deplibs $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + newlib_search_path="$newlib_search_path $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + case $deplib in + -L*) path="$deplib" ;; + *.la) + dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$deplib" && dir="." + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 + absdir="$dir" + fi + ;; + esac + if grep "^installed=no" $deplib > /dev/null; then + path="$absdir/$objdir" + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + if test "$absdir" != "$libdir"; then + $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 + fi + path="$absdir" + fi + depdepl= + case $host in + *-*-darwin*) + # we do not want to link against static libs, + # but need to link against shared + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$path/$depdepl" ; then + depdepl="$path/$depdepl" + fi + # do not add paths which are already there + case " $newlib_search_path " in + *" $path "*) ;; + *) newlib_search_path="$newlib_search_path $path";; + esac + fi + path="" + ;; + *) + path="-L$path" + ;; + esac + ;; + -l*) + case $host in + *-*-darwin*) + # Again, we only want to link against shared libraries + eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` + for tmp in $newlib_search_path ; do + if test -f "$tmp/lib$tmp_libs.dylib" ; then + eval depdepl="$tmp/lib$tmp_libs.dylib" + break + fi + done + path="" + ;; + *) continue ;; + esac + ;; + *) continue ;; + esac + case " $deplibs " in + *" $depdepl "*) ;; + *) deplibs="$depdepl $deplibs" ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$deplibs $path" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + tmp_libs="$tmp_libs $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 + fi + + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 + fi + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + objs="$objs$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + if test "$module" = no; then + $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 + exit $EXIT_FAILURE + else + $echo + $echo "*** Warning: Linking the shared library $output against the non-libtool" + $echo "*** objects $objs is not portable!" + libobjs="$libobjs $objs" + fi + fi + + if test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 + fi + + set dummy $rpath + if test "$#" -gt 2; then + $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 + fi + install_libdir="$2" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 + fi + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + IFS="$save_ifs" + + if test -n "$8"; then + $echo "$modename: too many parameters to \`-version-info'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$2" + number_minor="$3" + number_revision="$4" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + darwin|linux|osf|windows) + current=`expr $number_major + $number_minor` + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + current=`expr $number_major + $number_minor - 1` + age="$number_minor" + revision="$number_minor" + ;; + esac + ;; + no) + current="$2" + revision="$3" + age="$4" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + [0-9]*) ;; + *) + $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + case $revision in + [0-9]*) ;; + *) + $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + case $age in + [0-9]*) ;; + *) + $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + if test "$age" -gt "$current"; then + $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + minor_current=`expr $current + 1` + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current"; + ;; + + irix | nonstopux) + major=`expr $current - $age + 1` + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + iface=`expr $revision - $loop` + loop=`expr $loop - 1` + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + ;; + + osf) + major=.`expr $current - $age` + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + iface=`expr $current - $loop` + loop=`expr $loop - 1` + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + verstring="$verstring:${current}.0" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + major=`expr $current - $age` + versuffix="-$major" + ;; + + *) + $echo "$modename: unknown library version type \`$version_type'" 1>&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + fi + + if test "$mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$echo "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + removelist="$removelist $p" + ;; + *) ;; + esac + done + if test -n "$removelist"; then + $show "${rm}r $removelist" + $run ${rm}r $removelist + fi + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + oldlibs="$oldlibs $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + for path in $notinst_path; do + lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'` + deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'` + dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` + done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + temp_xrpath="$temp_xrpath -R$libdir" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) dlfiles="$dlfiles $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) dlprefiles="$dlprefiles $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + deplibs="$deplibs -framework System" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + deplibs="$deplibs -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $rm conftest.c + cat > conftest.c </dev/null` + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null \ + | grep " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ + | ${SED} 10q \ + | $EGREP "$file_magic_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $echo "*** with $libname but no candidates were found. (...for file magic test)" + else + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a file magic. Last file checked: $potlib" + fi + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + for a_deplib in $deplibs; do + name="`expr $a_deplib : '-l\(.*\)'`" + # If $name is empty we are operating on a -L argument. + if test -n "$name" && test "$name" != "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval $echo \"$potent_lib\" 2>/dev/null \ + | ${SED} 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $echo "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a regex pattern. Last file checked: $potlib" + fi + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ + -e 's/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` + done + fi + if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ + | grep . >/dev/null; then + $echo + if test "X$deplibs_check_method" = "Xnone"; then + $echo "*** Warning: inter-library dependencies are not supported in this platform." + else + $echo "*** Warning: inter-library dependencies are not known to be supported." + fi + $echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + fi + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + $echo + $echo "*** Warning: libtool could not satisfy all declared inter-library" + $echo "*** dependencies of module $libname. Therefore, libtool will create" + $echo "*** a static module, that should work as long as the dlopening" + $echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + $echo "*** The inter-library dependencies that have been dropped here will be" + $echo "*** automatically added whenever a program is linked with this library" + $echo "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + $echo + $echo "*** Since this library must not contain undefined symbols," + $echo "*** because either the platform does not support them or" + $echo "*** it was explicitly requested with -no-undefined," + $echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + dep_rpath="$dep_rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + if test -n "$hardcode_libdir_flag_spec_ld"; then + eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + realname="$2" + shift; shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib="$output_objdir/$realname" + for link + do + linknames="$linknames $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + if len=`expr "X$cmd" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + $show "$cmd" + $run eval "$cmd" || exit $? + skipped_export=false + else + # The command line is too long to execute in one step. + $show "using reloadable object file for export list..." + skipped_export=: + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex"; then + $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" + $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + $show "$mv \"${export_symbols}T\" \"$export_symbols\"" + $run eval '$mv "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + tmp_deplibs="$tmp_deplibs $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${outputname}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + status=$? + if test "$status" -ne 0 && test ! -d "$gentop"; then + exit $status + fi + generated="$generated $gentop" + + for xlib in $convenience; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "$mkdir $xdir" + $run $mkdir "$xdir" + status=$? + if test "$status" -ne 0 && test ! -d "$xdir"; then + exit $status + fi + # We will extract separately just the conflicting names and we will no + # longer touch any unique names. It is faster to leave these extract + # automatically by $AR in one run. + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 + $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 + $AR t "$xabs" | sort | uniq -cd | while read -r count name + do + i=1 + while test "$i" -le "$count" + do + # Put our $i before any first dot (extension) + # Never overwrite any file + name_to="$name" + while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" + do + name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` + done + $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" + $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? + i=`expr $i + 1` + done + done + fi + + libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + linker_flags="$linker_flags $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise. + $echo "creating reloadable object files..." + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + delfiles= + last_robj= + k=1 + output=$output_objdir/$save_output-${k}.$objext + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + eval test_cmds=\"$reload_cmds $objlist $last_robj\" + if test "X$objlist" = X || + { len=`expr "X$test_cmds" : ".*"` && + test "$len" -le "$max_cmd_len"; }; then + objlist="$objlist $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + eval concat_cmds=\"$reload_cmds $objlist $last_robj\" + else + # All subsequent reloadable object files will link in + # the last one created. + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" + fi + last_robj=$output_objdir/$save_output-${k}.$objext + k=`expr $k + 1` + output=$output_objdir/$save_output-${k}.$objext + objlist=$obj + len=1 + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" + + if ${skipped_export-false}; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols + libobjs=$output + # Append the command to create the export file. + eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" + fi + + # Set up a command to remove the reloadale object files + # after they are used. + i=0 + while test "$i" -lt "$k" + do + i=`expr $i + 1` + delfiles="$delfiles $output_objdir/$save_output-${i}.$objext" + done + + $echo "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + + # Append the command to remove the reloadable object files + # to the just-reset $cmds. + eval cmds=\"\$cmds~\$rm $delfiles\" + fi + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" + $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 + fi + + case $output in + *.lo) + if test -n "$objs$old_deplibs"; then + $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 + exit $EXIT_FAILURE + fi + libobj="$output" + obj=`$echo "X$output" | $Xsed -e "$lo2o"` + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $run $rm $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${obj}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + status=$? + if test "$status" -ne 0 && test ! -d "$gentop"; then + exit $status + fi + generated="$generated $gentop" + + for xlib in $convenience; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "$mkdir $xdir" + $run $mkdir "$xdir" + status=$? + if test "$status" -ne 0 && test ! -d "$xdir"; then + exit $status + fi + # We will extract separately just the conflicting names and we will no + # longer touch any unique names. It is faster to leave these extract + # automatically by $AR in one run. + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 + $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 + $AR t "$xabs" | sort | uniq -cd | while read -r count name + do + i=1 + while test "$i" -le "$count" + do + # Put our $i before any first dot (extension) + # Never overwrite any file + name_to="$name" + while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" + do + name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` + done + $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" + $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? + i=`expr $i + 1` + done + done + fi + + reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + fi + fi + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + cmds=$reload_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + exit $EXIT_SUCCESS + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $run eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + cmds=$reload_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + exit $EXIT_SUCCESS + ;; + + prog) + case $host in + *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; + esac + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 + fi + + if test "$preload" = yes; then + if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && + test "$dlopen_self_static" = unknown; then + $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." + fi + fi + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + + case $host in + *darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + if test "$tagname" = CXX ; then + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" + fi + ;; + esac + + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + case :$dllsearchpath: in + *":$libdir:"*) ;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + fi + + dlsyms= + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + dlsyms="${outputname}S.c" + else + $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 + fi + fi + + if test -n "$dlsyms"; then + case $dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${outputname}.nm" + + $show "$rm $nlist ${nlist}S ${nlist}T" + $run $rm "$nlist" "${nlist}S" "${nlist}T" + + # Parse the name list into a source file. + $show "creating $output_objdir/$dlsyms" + + test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ +/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ +/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +/* Prevent the only kind of declaration conflicts we can make. */ +#define lt_preloaded_symbols some_other_symbol + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + $show "generating symbol list for \`$output'" + + test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + for arg in $progfiles; do + $show "extracting global C symbols from \`$arg'" + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + if test -n "$export_symbols_regex"; then + $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$output.exp" + $run $rm $export_symbols + $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + else + $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' + $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' + $run eval 'mv "$nlist"T "$nlist"' + fi + fi + + for arg in $dlprefiles; do + $show "extracting global C symbols from \`$arg'" + name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` + $run eval '$echo ": $name " >> "$nlist"' + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -z "$run"; then + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $mv "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if grep -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + grep -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' + else + $echo '/* NONE */' >> "$output_objdir/$dlsyms" + fi + + $echo >> "$output_objdir/$dlsyms" "\ + +#undef lt_preloaded_symbols + +#if defined (__STDC__) && __STDC__ +# define lt_ptr void * +#else +# define lt_ptr char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr address; +} +lt_preloaded_symbols[] = +{\ +" + + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" + + $echo >> "$output_objdir/$dlsyms" "\ + {0, (lt_ptr) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + fi + + pic_flag_for_symtable= + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; + esac;; + *-*-hpux*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag";; + esac + esac + + # Now compile the dynamic symbol file. + $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" + $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + + # Clean up the generated files. + $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" + $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" + + # Transform the symbol file into the correct name. + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + ;; + *) + $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 + exit $EXIT_FAILURE + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi + + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + # Replace the output file specification. + compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + $show "$link_command" + $run eval "$link_command" + status=$? + + # Delete the generated files. + if test -n "$dlsyms"; then + $show "$rm $output_objdir/${outputname}S.${objext}" + $run $rm "$output_objdir/${outputname}S.${objext}" + fi + + exit $status + fi + + if test -n "$shlibpath_var"; then + # We should set the shlibpath_var + rpath= + for dir in $temp_rpath; do + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) + # Absolute path. + rpath="$rpath$dir:" + ;; + *) + # Relative path: add a thisdir entry. + rpath="$rpath\$thisdir/$dir:" + ;; + esac + done + temp_rpath="$rpath" + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + rpath="$rpath$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $run $rm $output + # Link the executable and exit + $show "$link_command" + $run eval "$link_command" || exit $? + exit $EXIT_SUCCESS + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 + $echo "$modename: \`$output' will be relinked during installation" 1>&2 + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname + + $show "$link_command" + $run eval "$link_command" || exit $? + + # Now create the wrapper script. + $show "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + fi + + # Quote $echo for shipping. + if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then + case $progpath in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; + *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; + esac + qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` + else + qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` + fi + + # Only actually do things if our run command is non-null. + if test -z "$run"; then + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + cwrappersource=`$echo ${objdir}/lt-${output}.c` + cwrapper=`$echo ${output}.exe` + $rm $cwrappersource $cwrapper + trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + cat > $cwrappersource <> $cwrappersource<<"EOF" +#include +#include +#include +#include +#include +#include + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef DIR_SEPARATOR +#define DIR_SEPARATOR '/' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +#define HAVE_DOS_BASED_FILE_SYSTEM +#ifndef DIR_SEPARATOR_2 +#define DIR_SEPARATOR_2 '\\' +#endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +const char *program_name = NULL; + +void * xmalloc (size_t num); +char * xstrdup (const char *string); +char * basename (const char *name); +char * fnqualify(const char *path); +char * strendzap(char *str, const char *pat); +void lt_fatal (const char *message, ...); + +int +main (int argc, char *argv[]) +{ + char **newargz; + int i; + + program_name = (char *) xstrdup ((char *) basename (argv[0])); + newargz = XMALLOC(char *, argc+2); +EOF + + cat >> $cwrappersource <> $cwrappersource <<"EOF" + newargz[1] = fnqualify(argv[0]); + /* we know the script has the same name, without the .exe */ + /* so make sure newargz[1] doesn't end in .exe */ + strendzap(newargz[1],".exe"); + for (i = 1; i < argc; i++) + newargz[i+1] = xstrdup(argv[i]); + newargz[argc+1] = NULL; +EOF + + cat >> $cwrappersource <> $cwrappersource <<"EOF" +} + +void * +xmalloc (size_t num) +{ + void * p = (void *) malloc (num); + if (!p) + lt_fatal ("Memory exhausted"); + + return p; +} + +char * +xstrdup (const char *string) +{ + return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL +; +} + +char * +basename (const char *name) +{ + const char *base; + +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ + if (isalpha (name[0]) && name[1] == ':') + name += 2; +#endif + + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; + return (char *) base; +} + +char * +fnqualify(const char *path) +{ + size_t size; + char *p; + char tmp[LT_PATHMAX + 1]; + + assert(path != NULL); + + /* Is it qualified already? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha (path[0]) && path[1] == ':') + return xstrdup (path); +#endif + if (IS_DIR_SEPARATOR (path[0])) + return xstrdup (path); + + /* prepend the current directory */ + /* doesn't handle '~' */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */ + p = XMALLOC(char, size); + sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path); + return p; +} + +char * +strendzap(char *str, const char *pat) +{ + size_t len, patlen; + + assert(str != NULL); + assert(pat != NULL); + + len = strlen(str); + patlen = strlen(pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp(str, pat) == 0) + *str = '\0'; + } + return str; +} + +static void +lt_error_core (int exit_status, const char * mode, + const char * message, va_list ap) +{ + fprintf (stderr, "%s: %s: ", program_name, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); + va_end (ap); +} +EOF + # we should really use a build-platform specific compiler + # here, but OTOH, the wrappers (shell script and this C one) + # are only useful if you want to execute the "real" binary. + # Since the "real" binary is built for $host, then this + # wrapper might as well be built for $host, too. + $run $LTCC -s -o $cwrapper $cwrappersource + ;; + esac + $rm $output + trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 + + $echo > $output "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='${SED} -e 1s/^X//' +sed_quote_subst='$sed_quote_subst' + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variable: + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$echo are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + echo=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$echo works! + : + else + # Restart under the correct shell, and then maybe \$echo will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ +" + $echo >> $output "\ + + # Find the directory that this script lives in. + thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` + done + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $echo >> $output "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || \\ + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $mkdir \"\$progdir\" + else + $rm \"\$progdir/\$file\" + fi" + + $echo >> $output "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $echo \"\$relink_command_output\" >&2 + $rm \"\$progdir/\$file\" + exit $EXIT_FAILURE + fi + fi + + $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $rm \"\$progdir/\$program\"; + $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $rm \"\$progdir/\$file\" + fi" + else + $echo >> $output "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $echo >> $output "\ + + if test -f \"\$progdir/\$program\"; then" + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $echo >> $output "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + + export $shlibpath_var +" + fi + + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $echo >> $output "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + $echo >> $output "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2*) + $echo >> $output "\ + exec \$progdir\\\\\$program \${1+\"\$@\"} +" + ;; + + *) + $echo >> $output "\ + exec \$progdir/\$program \${1+\"\$@\"} +" + ;; + esac + $echo >> $output "\ + \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" + exit $EXIT_FAILURE + fi + else + # The program doesn't exist. + \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 + \$echo \"This script is just a wrapper for \$program.\" 1>&2 + $echo \"See the $PACKAGE documentation for more information.\" 1>&2 + exit $EXIT_FAILURE + fi +fi\ +" + chmod +x $output + fi + exit $EXIT_SUCCESS + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + status=$? + if test "$status" -ne 0 && test ! -d "$gentop"; then + exit $status + fi + generated="$generated $gentop" + + # Add in members from convenience archives. + for xlib in $addlibs; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "$mkdir $xdir" + $run $mkdir "$xdir" + status=$? + if test "$status" -ne 0 && test ! -d "$xdir"; then + exit $status + fi + # We will extract separately just the conflicting names and we will no + # longer touch any unique names. It is faster to leave these extract + # automatically by $AR in one run. + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 + $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 + $AR t "$xabs" | sort | uniq -cd | while read -r count name + do + i=1 + while test "$i" -le "$count" + do + # Put our $i before any first dot (extension) + # Never overwrite any file + name_to="$name" + while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" + do + name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` + done + $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" + $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? + i=`expr $i + 1` + done + done + fi + + oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` + done + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else + eval cmds=\"$old_archive_cmds\" + + if len=`expr "X$cmds" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + $echo "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + # GNU ar 2.10+ was changed to match POSIX; thus no paths are + # encoded into archives. This makes 'ar r' malfunction in + # this piecewise linking case whenever conflicting object + # names appear in distinct ar calls; check, warn and compensate. + if (for obj in $save_oldobjs + do + $echo "X$obj" | $Xsed -e 's%^.*/%%' + done | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2 + $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2 + AR_FLAGS=cq + fi + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + for obj in $save_oldobjs + do + oldobjs="$objlist $obj" + objlist="$objlist $obj" + eval test_cmds=\"$old_archive_cmds\" + if len=`expr "X$test_cmds" : ".*"` && + test "$len" -le "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + eval cmd=\"$cmd\" + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$generated"; then + $show "${rm}r$generated" + $run ${rm}r$generated + fi + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + $show "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + + + # Only create the output if not a dry run. + if test -z "$run"; then + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + newdependency_libs="$newdependency_libs $libdir/$name" + ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + for lib in $dlfiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + newdlfiles="$newdlfiles $libdir/$name" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + newdlprefiles="$newdlprefiles $libdir/$name" + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlfiles="$newdlfiles $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlprefiles="$newdlprefiles $abs" + done + dlprefiles="$newdlprefiles" + fi + $rm $output + # place dlname in correct position for cygwin + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + esac + $echo > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes; then + $echo >> $output "\ +relink_command=\"$relink_command\"" + fi + done + fi + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" + $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? + ;; + esac + exit $EXIT_SUCCESS + ;; + + # libtool install mode + install) + modename="$modename: install" + + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then + # Aesthetically quote it. + arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$arg " + arg="$1" + shift + else + install_prog= + arg="$nonopt" + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog$arg" + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + for arg + do + if test -n "$dest"; then + files="$files $dest" + dest="$arg" + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) prev="-f" ;; + -g) prev="-g" ;; + -m) prev="-m" ;; + -o) prev="-o" ;; + -s) + stripme=" -s" + continue + ;; + -*) ;; + + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else + dest="$arg" + continue + fi + ;; + esac + + # Aesthetically quote the argument. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog $arg" + done + + if test -z "$install_prog"; then + $echo "$modename: you must specify an install program" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + if test -n "$prev"; then + $echo "$modename: the \`$prev' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + if test -z "$files"; then + if test -z "$dest"; then + $echo "$modename: no file or destination specified" 1>&2 + else + $echo "$modename: you must specify a destination" 1>&2 + fi + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Strip any trailing slash from the destination. + dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` + test "X$destdir" = "X$dest" && destdir=. + destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` + + # Not a directory, so check to see that there is only one file specified. + set dummy $files + if test "$#" -gt 2; then + $echo "$modename: \`$dest' is not a directory" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + library_names= + old_library= + relink_command= + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ + test "X$dir" = "X$file/" && dir= + dir="$dir$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + if test "$inst_prefix_dir" = "$destdir"; then + $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 + exit $EXIT_FAILURE + fi + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + $echo "$modename: warning: relinking \`$file'" 1>&2 + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + exit $EXIT_FAILURE + fi + fi + + # See the names of the shared library. + set dummy $library_names + if test -n "$2"; then + realname="$2" + shift + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + $show "$install_prog $dir/$srcname $destdir/$realname" + $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? + if test -n "$stripme" && test -n "$striplib"; then + $show "$striplib $destdir/$realname" + $run eval "$striplib $destdir/$realname" || exit $? + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + for linkname + do + if test "$linkname" != "$realname"; then + $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" + $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" + fi + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + cmds=$postinstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Install the pseudo-library for information purposes. + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + instname="$dir/$name"i + $show "$install_prog $instname $destdir/$name" + $run eval "$install_prog $instname $destdir/$name" || exit $? + + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + # Install the libtool object if requested. + if test -n "$destfile"; then + $show "$install_prog $file $destfile" + $run eval "$install_prog $file $destfile" || exit $? + fi + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` + + $show "$install_prog $staticobj $staticdest" + $run eval "$install_prog \$staticobj \$staticdest" || exit $? + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + file=`$echo $file|${SED} 's,.exe$,,'` + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin*|*mingw*) + wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` + ;; + *) + wrapper=$file + ;; + esac + if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then + notinst_deplibs= + relink_command= + + # To insure that "foo" is sourced, and not "foo.exe", + # finese the cygwin/MSYS system by explicitly sourcing "foo." + # which disallows the automatic-append-.exe behavior. + case $build in + *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; + *) wrapperdot=${wrapper} ;; + esac + # If there is no directory component, then add one. + case $file in + */* | *\\*) . ${wrapperdot} ;; + *) . ./${wrapperdot} ;; + esac + + # Check the variables that should have been set. + if test -z "$notinst_deplibs"; then + $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 + exit $EXIT_FAILURE + fi + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + # If there is no directory component, then add one. + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + fi + libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 + finalize=no + fi + done + + relink_command= + # To insure that "foo" is sourced, and not "foo.exe", + # finese the cygwin/MSYS system by explicitly sourcing "foo." + # which disallows the automatic-append-.exe behavior. + case $build in + *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; + *) wrapperdot=${wrapper} ;; + esac + # If there is no directory component, then add one. + case $file in + */* | *\\*) . ${wrapperdot} ;; + *) . ./${wrapperdot} ;; + esac + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + if test "$finalize" = yes && test -z "$run"; then + tmpdir="/tmp" + test -n "$TMPDIR" && tmpdir="$TMPDIR" + tmpdir="$tmpdir/libtool-$$" + save_umask=`umask` + umask 0077 + if $mkdir "$tmpdir"; then + umask $save_umask + else + umask $save_umask + $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 + continue + fi + file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + ${rm}r "$tmpdir" + continue + fi + file="$outputname" + else + $echo "$modename: warning: cannot relink \`$file'" 1>&2 + fi + else + # Install the binary that we compiled earlier. + file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyways + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` + ;; + esac + ;; + esac + $show "$install_prog$stripme $file $destfile" + $run eval "$install_prog\$stripme \$file \$destfile" || exit $? + test -n "$outputname" && ${rm}r "$tmpdir" + ;; + esac + done + + for file in $staticlibs; do + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + $show "$install_prog $file $oldlib" + $run eval "$install_prog \$file \$oldlib" || exit $? + + if test -n "$stripme" && test -n "$old_striplib"; then + $show "$old_striplib $oldlib" + $run eval "$old_striplib $oldlib" || exit $? + fi + + # Do each command in the postinstall commands. + cmds=$old_postinstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$future_libdirs"; then + $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 + fi + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + test -n "$run" && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi + ;; + + # libtool finish mode + finish) + modename="$modename: finish" + libdirs="$nonopt" + admincmds= + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + cmds=$finish_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || admincmds="$admincmds + $cmd" + done + IFS="$save_ifs" + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $run eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + test "$show" = : && exit $EXIT_SUCCESS + + $echo "----------------------------------------------------------------------" + $echo "Libraries have been installed in:" + for libdir in $libdirs; do + $echo " $libdir" + done + $echo + $echo "If you ever happen to want to link against installed libraries" + $echo "in a given directory, LIBDIR, you must either use libtool, and" + $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + $echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + $echo " during execution" + fi + if test -n "$runpath_var"; then + $echo " - add LIBDIR to the \`$runpath_var' environment variable" + $echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $echo " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $echo " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + $echo + $echo "See any operating system documentation about shared libraries for" + $echo "more information, such as the ld(1) and ld.so(8) manual pages." + $echo "----------------------------------------------------------------------" + exit $EXIT_SUCCESS + ;; + + # libtool execute mode + execute) + modename="$modename: execute" + + # The first argument is the command name. + cmd="$nonopt" + if test -z "$cmd"; then + $echo "$modename: you must specify a COMMAND" 1>&2 + $echo "$help" + exit $EXIT_FAILURE + fi + + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + if test ! -f "$file"; then + $echo "$modename: \`$file' is not a file" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + dir= + case $file in + *.la) + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Read the libtool library. + dlname= + library_names= + + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" + continue + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" + else + $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 + exit $EXIT_FAILURE + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + ;; + + *) + $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -*) ;; + *) + # Do a test to see if this is really a libtool program. + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` + args="$args \"$file\"" + done + + if test -z "$run"; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + if test "${save_LC_ALL+set}" = set; then + LC_ALL="$save_LC_ALL"; export LC_ALL + fi + if test "${save_LANG+set}" = set; then + LANG="$save_LANG"; export LANG + fi + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" + $echo "export $shlibpath_var" + fi + $echo "$cmd$args" + exit $EXIT_SUCCESS + fi + ;; + + # libtool clean and uninstall mode + clean | uninstall) + modename="$modename: $mode" + rm="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) rm="$rm $arg"; rmforce=yes ;; + -*) rm="$rm $arg" ;; + *) files="$files $arg" ;; + esac + done + + if test -z "$rm"; then + $echo "$modename: you must specify an RM program" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + rmdirs= + + origobjdir="$objdir" + for file in $files; do + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + if test "X$dir" = "X$file"; then + dir=. + objdir="$origobjdir" + else + objdir="$dir/$origobjdir" + fi + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + test "$mode" = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates + if test "$mode" = clean; then + case " $rmdirs " in + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if (test -L "$file") >/dev/null 2>&1 \ + || (test -h "$file") >/dev/null 2>&1 \ + || test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + . $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + rmfiles="$rmfiles $objdir/$n" + done + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" + test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + + if test "$mode" = uninstall; then + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + cmds=$postuninstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" + if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + cmds=$old_postuninstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" + if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" + fi + # FIXME: should reinstall the best remaining shared library. + fi + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + + # Read the .lo file + . $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" \ + && test "$pic_object" != none; then + rmfiles="$rmfiles $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" \ + && test "$non_pic_object" != none; then + rmfiles="$rmfiles $dir/$non_pic_object" + fi + fi + ;; + + *) + if test "$mode" = clean ; then + noexename=$name + case $file in + *.exe) + file=`$echo $file|${SED} 's,.exe$,,'` + noexename=`$echo $name|${SED} 's,.exe$,,'` + # $file with .exe has already been added to rmfiles, + # add $file without .exe + rmfiles="$rmfiles $file" + ;; + esac + # Do a test to see if this is a libtool program. + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + relink_command= + . $dir/$noexename + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + rmfiles="$rmfiles $objdir/lt-${noexename}.c" + fi + fi + fi + ;; + esac + $show "$rm $rmfiles" + $run $rm $rmfiles || exit_status=1 + done + objdir="$origobjdir" + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + $show "rmdir $dir" + $run rmdir $dir >/dev/null 2>&1 + fi + done + + exit $exit_status + ;; + + "") + $echo "$modename: you must specify a MODE" 1>&2 + $echo "$generic_help" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + if test -z "$exec_cmd"; then + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$generic_help" 1>&2 + exit $EXIT_FAILURE + fi +fi # test -z "$show_help" + +if test -n "$exec_cmd"; then + eval exec $exec_cmd + exit $EXIT_FAILURE +fi + +# We need to display help for each of the modes. +case $mode in +"") $echo \ +"Usage: $modename [OPTION]... [MODE-ARG]... + +Provide generalized library-building support services. + + --config show all configuration variables + --debug enable verbose shell tracing +-n, --dry-run display commands without modifying any files + --features display basic configuration information and exit + --finish same as \`--mode=finish' + --help display this help message and exit + --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] + --quiet same as \`--silent' + --silent don't print informational messages + --tag=TAG use configuration variables from tag TAG + --version print version information + +MODE must be one of the following: + + clean remove files from the build directory + compile compile a source file into a libtool object + execute automatically set library path, then run a program + finish complete the installation of libtool libraries + install install libraries or executables + link create a library or an executable + uninstall remove libraries from an installed directory + +MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for +a more detailed description of MODE. + +Report bugs to ." + exit $EXIT_SUCCESS + ;; + +clean) + $echo \ +"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + +compile) + $echo \ +"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only + -static always build a \`.o' file suitable for static linking + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + +execute) + $echo \ +"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + +finish) + $echo \ +"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + +install) + $echo \ +"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + +link) + $echo \ +"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -static do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + +uninstall) + $echo \ +"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + +*) + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; +esac + +$echo +$echo "Try \`$modename --help' for more information about other modes." + +exit $EXIT_SUCCESS + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/RadioMetaData_p.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/RadioMetaData_p.cpp (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/RadioMetaData_p.cpp (revision 8424) @@ -0,0 +1,112 @@ +/**************************************************************************** + +Copyright 2006, Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Core Framework. + +OSSIE Core Framework is free software; you can redistribute it and/or modify +it under the terms of the Lesser GNU General Public License as published by +the Free Software Foundation; either version 2.1 of the License, or +(at your option) any later version. + +OSSIE Core Framework is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +Lesser GNU General Public License for more details. + +You should have received a copy of the Lesser GNU General Public License +along with OSSIE Core Framework; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +****************************************************************************/ + +#include + +#include + +#include + +standardInterfacesMD_i::RadioMetaData_p::RadioMetaData_p(const char* _name, unsigned int bufLen) : portName(_name), bufferLength(bufLen), rdPtr(0), wrPtr(0) +{ + + data_servant = new RadioMetaData::providesPort(this); + data_servant_var = data_servant->_this(); + + // Initialize MetaData + standardInterfacesMD::MetaData metadata; + InitializeMetaData( metadata ); + metadata_buf.assign(bufferLength, metadata); + + ready_for_input = new omni_semaphore(bufferLength); + data_ready = new omni_semaphore(0); + + +} + +standardInterfacesMD_i::RadioMetaData_p::RadioMetaData_p(const char* _name, const char* _domain, unsigned int bufLen) : portName(_name), bufferLength(bufLen), rdPtr(0), wrPtr(0) +{ + ossieSupport::ORB orb; + + data_servant = new RadioMetaData::providesPort(this); + data_servant_var = data_servant->_this(); + + // Initialize MetaData + standardInterfacesMD::MetaData metadata; + InitializeMetaData( metadata ); + metadata_buf.assign(bufferLength, metadata); + + ready_for_input = new omni_semaphore(bufferLength); + data_ready = new omni_semaphore(0); + + std::string objName; + objName = _domain; + objName += "/"; + objName += _name; + + orb.bind_object_to_name((CORBA::Object_ptr) data_servant_var, objName.c_str()); +} + +standardInterfacesMD_i::RadioMetaData_p::~RadioMetaData_p() +{ + +} + +CORBA::Object_ptr standardInterfacesMD_i::RadioMetaData_p::getPort(const char* _portName) +{ + if (portName == _portName) + return CORBA::Object::_duplicate(data_servant_var); + else + return CORBA::Object::_nil(); +} + +void standardInterfacesMD_i::RadioMetaData_p::getMetaData( + standardInterfacesMD::MetaData* &packet_data) +{ + data_ready->wait(); + + packet_data = &metadata_buf[rdPtr]; + rdPtr = (++rdPtr) % bufferLength; +} + +RadioMetaData::providesPort::providesPort(standardInterfacesMD_i::RadioMetaData_p* _base) : base(_base) +{ + +} + +RadioMetaData::providesPort::~providesPort() +{ + +} + +void RadioMetaData::providesPort::pushMetaData( + const standardInterfacesMD::MetaData &packet_data) +{ + base->ready_for_input->wait(); + + // Deep copy meta data to RadioMetaData_p base and add it to the buffer + (base->metadata_buf)[base->wrPtr] = packet_data; + + base->wrPtr = (++(base->wrPtr)) % base->bufferLength; + + base->data_ready->post(); +} Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/realCharMD_p.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/realCharMD_p.cpp (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/realCharMD_p.cpp (revision 8424) @@ -0,0 +1,124 @@ +/**************************************************************************** + +Copyright 2006, Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Core Framework. + +OSSIE Core Framework is free software; you can redistribute it and/or modify +it under the terms of the Lesser GNU General Public License as published by +the Free Software Foundation; either version 2.1 of the License, or +(at your option) any later version. + +OSSIE Core Framework is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +Lesser GNU General Public License for more details. + +You should have received a copy of the Lesser GNU General Public License +along with OSSIE Core Framework; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +****************************************************************************/ + +#include +#include +#include + +standardInterfacesMD_i::realChar_p::realChar_p(const char* _name, unsigned int bufLen) : portName(_name), bufferLength(bufLen), rdPtr(0), wrPtr(0) +{ + + data_servant = new realChar::providesPort(this); + data_servant_var = data_servant->_this(); + + PortTypes::CharSequence a; + I_buf.assign(bufferLength, a); + + // Initialize MetaData + InitializeMetaData( metadata ); + metadata_buf.assign(bufferLength, metadata); + + ready_for_input = new omni_semaphore(bufferLength); + data_ready = new omni_semaphore(0); +} + +standardInterfacesMD_i::realChar_p::~realChar_p() +{ + +} + +CORBA::Object_ptr standardInterfacesMD_i::realChar_p::getPort(const char* _portName) +{ + if (portName == _portName) + return CORBA::Object::_duplicate(data_servant_var); + else + return CORBA::Object::_nil(); +} + +void standardInterfacesMD_i::realChar_p::bufferEmptied() +{ + ready_for_input->post(); +} + +void standardInterfacesMD_i::realChar_p::getData( + PortTypes::CharSequence* &I, + standardInterfacesMD::MetaData* &packet_data +) +{ + data_ready->wait(); + + I = &I_buf[rdPtr]; + packet_data = &metadata_buf[rdPtr]; + rdPtr = ++rdPtr % bufferLength; +} + +void standardInterfacesMD_i::realChar_p::getData(PortTypes::CharSequence* &I) +{ + data_ready->wait(); + + I = &I_buf[rdPtr]; + rdPtr = ++rdPtr % bufferLength; +} + +realChar::providesPort::providesPort(standardInterfacesMD_i::realChar_p* _base) : base(_base) +{ + +} + +realChar::providesPort::~providesPort() +{ + +} + +void realChar::providesPort::pushPacket( + const PortTypes::CharSequence &I) +{ + base->ready_for_input->wait(); + + base->I_buf[base->wrPtr] = I; + + // Create blank metadata object and add it to the buffer + standardInterfacesMD::MetaData metadata; + InitializeMetaData( metadata ); + (base->metadata_buf)[base->wrPtr] = metadata; + + base->wrPtr= ++base->wrPtr % base->bufferLength; + + base->data_ready->post(); +} + +void realChar::providesPort::pushPacketMetaData( + const PortTypes::CharSequence &I, + const standardInterfacesMD::MetaData &packet_data) +{ + base->ready_for_input->wait(); + + base->I_buf[base->wrPtr] = I; + + // Deep copy meta data to complexShort_p base and add it to the buffer + base->metadata = packet_data; + (base->metadata_buf)[base->wrPtr] = packet_data; + + base->wrPtr= ++base->wrPtr % base->bufferLength; + + base->data_ready->post(); +} Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/configure.ac =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/configure.ac (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/configure.ac (revision 8424) @@ -0,0 +1,36 @@ +AC_INIT(standardInterfaces-metadata, 0.6.0) +AC_PREREQ(2.59) + +AM_INIT_AUTOMAKE(nostdinc) + +AC_PROG_CXX +AC_PROG_INSTALL +AC_PROG_MAKE_SET +AC_PROG_LIBTOOL + +AC_LANG_PUSH([C++]) + +AC_CHECK_LIB([omniORB4], [main], [], [AC_MSG_ERROR([cannot find omniORB library])]) +AC_CHECK_LIB([omnithread], [main], [], [AC_MSG_ERROR([cannot find omnithread library])]) +AC_CHECK_HEADERS([omniORB4/CORBA.h], [], [AC_MSG_ERROR([cannot find omniORB4 header files])]) +AC_CHECK_PROG([IDL], [omniidl], [omniidl], [AC_MSG_ERROR([cannot find omniidl prgram])]) + +AM_PATH_PYTHON([2.5]) + +AC_LANG_POP + +export PKG_CONFIG_PATH="$PKG_CONFIG_PATH:/usr/local/lib/pkgconfig" +PKG_CHECK_MODULES(OSSIE, ossie >= 0.6.0,,exit) +CXXFLAGS="$CXXFLAGS $OSSIE_CFLAGS" +LIBS="$LIBS $OSSIE_LIBS" +IDL_FLAGS="$OSSIE_CFLAGS" +AC_SUBST(IDL_FLAGS) + +AC_CONFIG_FILES( + Makefile + python/Makefile + include/Makefile + include/standardinterfaces-metadata/Makefile + standardInterfaces-metadata.pc) +AC_OUTPUT + Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/RadioMetaData_u.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/RadioMetaData_u.cpp (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/RadioMetaData_u.cpp (revision 8424) @@ -0,0 +1,118 @@ +/**************************************************************************** + +Copyright 2006, Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Core Framework. + +OSSIE Core Framework is free software; you can redistribute it and/or modify +it under the terms of the Lesser GNU General Public License as published by +the Free Software Foundation; either version 2.1 of the License, or +(at your option) any later version. + +OSSIE Core Framework is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +Lesser GNU General Public License for more details. + +You should have received a copy of the Lesser GNU General Public License +along with OSSIE Core Framework; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +****************************************************************************/ + +#include + +#include + +#include "standardinterfaces-metadata/RadioMetaData_u.h" +#include "ossie/debug.h" + +standardInterfacesMD_i::RadioMetaData_u::RadioMetaData_u(const char* _portName) +{ + portName = _portName; + + data_servant = new RadioMetaData::usesPort(this); + data_servant_var = data_servant->_this(); + +} + +standardInterfacesMD_i::RadioMetaData_u::RadioMetaData_u(const char* _name, const char* _domain) : portName(_name) +{ + ossieSupport::ORB orb; + + data_servant = new RadioMetaData::usesPort(this); + data_servant_var = data_servant->_this(); + + std::string objName; + objName = _domain; + objName += "/"; + objName += _name; + + orb.bind_object_to_name((CORBA::Object_ptr) data_servant_var, objName.c_str()); +} + +standardInterfacesMD_i::RadioMetaData_u::~RadioMetaData_u() +{ + +} + +CORBA::Object_ptr standardInterfacesMD_i::RadioMetaData_u::getPort(const char* _portName) +{ + if (portName == _portName) + return CORBA::Object::_duplicate(data_servant_var); + else + return CORBA::Object::_nil(); +} + + +void standardInterfacesMD_i::RadioMetaData_u::pushMetaData( + const standardInterfacesMD::MetaData &packet_data) +{ + omni_mutex_lock l(port_mutex); + for (unsigned int i = 0; i < dest_ports.size(); ++i) { + dest_ports[i].port_obj->pushMetaData(packet_data); + } +} + +RadioMetaData::usesPort::usesPort(standardInterfacesMD_i::RadioMetaData_u *_base) : base(_base) +{ +} + +RadioMetaData::usesPort::~usesPort() +{ +} + +void RadioMetaData::usesPort::connectPort(CORBA::Object_ptr connection, const char* connectionID) +{ + standardInterfacesMD::RadioMetaData_ptr p = standardInterfacesMD::RadioMetaData::_narrow(connection); + if (CORBA::is_nil(p)) { + std::cout << "Print port is not RadioMetaData" << std::endl; + return; + } + + omni_mutex_lock l(base->port_mutex); + for (unsigned int i = 0; i < base->dest_ports.size(); ++i) { + if (strcmp(base->dest_ports[i].getID(), connectionID) == 0) { + base->dest_ports[i].setPort(p); + return; + } + } + + RadioMetaData::ConnectionInfo c(p, connectionID); + base->dest_ports.push_back(c); + +} + +void RadioMetaData::usesPort::disconnectPort(const char* connectionID) +{ + omni_mutex_lock l(base->port_mutex); + for (unsigned int i = 0; i < base->dest_ports.size(); ++i) { + if (strcmp(base->dest_ports[i].getID(), connectionID) == 0) { + base->dest_ports.erase(base->dest_ports.begin() + i); + return; + } + } + + DEBUG(5, StandardInterfaces, "Attempted to disconnect non-existent connection: " << connectionID); + +} Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/INSTALL =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/INSTALL (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/INSTALL (revision 8424) @@ -0,0 +1,8 @@ +The Standard Interfaces installation process is the standard: + +./configure +make +su -c "make install" + +./configure --help returns the available configure options. + Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/RadioMetaData.idl =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/RadioMetaData.idl (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/RadioMetaData.idl (revision 8424) @@ -0,0 +1,74 @@ +/**************************************************************************** + +Copyright 2007 Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Standard Interfaces. + +OSSIE Standard Interfaces are free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +OSSIE Standard Interfaces is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with OSSIE Standard Interfaces; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +****************************************************************************/ + + +#include "ossie/PortTypes.idl" + +module standardInterfacesMD { + + /// Modulation scheme + struct ModulationScheme { + enum mod_scheme { + UNKNOWN, ///< Unknown modulation scheme + PSK, ///< Phase shift keying + DPSK, ///< Differential PSK + PAM, ///< Pulse amplitude modulation + FSK, ///< Frequency shift keying + QAM ///< Quadrature amplitude modulation + } scheme; + unsigned long M; ///< Number of symbols in constellation + }; + + /// \brief Meta data for packets + struct MetaData { + + /// Modulation scheme used for this packet + ModulationScheme modulation_scheme; + + unsigned long packet_id; ///< Generic packet id number + float sampling_frequency; ///< Sampling frequency (Hz) + float carrier_frequency; ///< Carrier frequency (Hz) + float signal_bandwidth; ///< Real-time signal bandwidth (Hz) + float signal_strength; ///< Signal strength (dB) + boolean eom; ///< End-of-message flag/marker + + unsigned long src_id; ///< Source identifier + unsigned long dst_id; ///< Destination identifier + unsigned long app_id; ///< Application identifier + unsigned long port_id; ///< Port identifier + + unsigned long packet_type; ///< Type of packet to use + }; + + /// \brief RadioMetaData interface + /// + /// Because interfaces such as complexShort already push meta data with each + /// packet, adding this interface to a components for describing its data is + /// not necessary. This interface is intended for debugging, configuring + /// properties, and sending control information about received packets. + interface RadioMetaData { + oneway void pushMetaData(in MetaData packet_data); + }; + +}; + Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/realCharMD_u.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/realCharMD_u.cpp (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/realCharMD_u.cpp (revision 8424) @@ -0,0 +1,135 @@ +/**************************************************************************** + +Copyright 2006, Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Core Framework. + +OSSIE Core Framework is free software; you can redistribute it and/or modify +it under the terms of the Lesser GNU General Public License as published by +the Free Software Foundation; either version 2.1 of the License, or +(at your option) any later version. + +OSSIE Core Framework is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +Lesser GNU General Public License for more details. + +You should have received a copy of the Lesser GNU General Public License +along with OSSIE Core Framework; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +****************************************************************************/ + +#include + +#include +#include + +#include "standardinterfaces-metadata/realCharMD_u.h" + +standardInterfacesMD_i::realChar_u::realChar_u(const char* _portName) +{ + portName = _portName; + + data_servant = new realChar::usesPort(this); + data_servant_var = data_servant->_this(); + + // initialize meta data + InitializeMetaData( metadata ); +} + +standardInterfacesMD_i::realChar_u::realChar_u(const char* _name, const char* _domain) : portName(_name) +{ + ossieSupport::ORB orb; + + data_servant = new realChar::usesPort(this); + data_servant_var = data_servant->_this(); + + std::string objName; + objName = _domain; + objName += "/"; + objName += _name; + + orb.bind_object_to_name((CORBA::Object_ptr) data_servant_var, objName.c_str()); + + // initialize meta data + InitializeMetaData( metadata ); +} + +standardInterfacesMD_i::realChar_u::~realChar_u() +{ + +} + +CORBA::Object_ptr standardInterfacesMD_i::realChar_u::getPort(const char* _portName) +{ + if (portName == _portName) + return CORBA::Object::_duplicate(data_servant_var); + else + return CORBA::Object::_nil(); +} + +void standardInterfacesMD_i::realChar_u::pushPacket( + const PortTypes::CharSequence &I, + const standardInterfacesMD::MetaData &packet_data) +{ + // update packet meta data + metadata = packet_data; + + omni_mutex_lock l(port_mutex); + for (unsigned int i = 0; i < dest_ports.size(); ++i) { + dest_ports[i].port_obj->pushPacketMetaData(I,metadata); + } +} + +void standardInterfacesMD_i::realChar_u::pushPacket(const PortTypes::CharSequence &I) +{ + omni_mutex_lock l(port_mutex); + for (unsigned int i = 0; i < dest_ports.size(); ++i) { + dest_ports[i].port_obj->pushPacket(I); + } +} + + +realChar::usesPort::usesPort(standardInterfacesMD_i::realChar_u *_base) : base(_base) +{ +} + +realChar::usesPort::~usesPort() +{ +} + +void realChar::usesPort::connectPort(CORBA::Object_ptr connection, const char* connectionID) +{ + standardInterfacesMD::realCharMD_ptr p = standardInterfacesMD::realCharMD::_narrow(connection); + if (CORBA::is_nil(p)) { + std::cout << "Print port is not realChar" << std::endl; + return; + } + + omni_mutex_lock l(base->port_mutex); + for (unsigned int i = 0; i < base->dest_ports.size(); ++i) { + if (strcmp(base->dest_ports[i].getID(), connectionID) == 0) { + base->dest_ports[i].setPort(p); + return; + } + } + + realChar::ConnectionInfo c(p, connectionID); + base->dest_ports.push_back(c); + +} + +void realChar::usesPort::disconnectPort(const char* connectionID) +{ + omni_mutex_lock l(base->port_mutex); + for (unsigned int i = 0; i < base->dest_ports.size(); ++i) { + if (strcmp(base->dest_ports[i].getID(), connectionID) == 0) { + base->dest_ports.erase(base->dest_ports.begin() + i); + return; + } + } + + DEBUG(5, StandardInterfaces, "Attempted to disconnect non-existent connection: " << connectionID); + +} Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/complexShortMD_p.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/complexShortMD_p.cpp (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/complexShortMD_p.cpp (revision 8424) @@ -0,0 +1,164 @@ +/**************************************************************************** + +Copyright 2006, Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Core Framework. + +OSSIE Core Framework is free software; you can redistribute it and/or modify +it under the terms of the Lesser GNU General Public License as published by +the Free Software Foundation; either version 2.1 of the License, or +(at your option) any later version. + +OSSIE Core Framework is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +Lesser GNU General Public License for more details. + +You should have received a copy of the Lesser GNU General Public License +along with OSSIE Core Framework; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +****************************************************************************/ + +#include + +#include + +#include + +standardInterfacesMD_i::complexShort_p::complexShort_p(const char* _name, unsigned int bufLen) : portName(_name), bufferLength(bufLen), rdPtr(0), wrPtr(0) +{ + + data_servant = new complexShort::providesPort(this); + data_servant_var = data_servant->_this(); + + // Initialize short sequence buffers with default + PortTypes::ShortSequence a; + I_buf.assign(bufferLength, a); + Q_buf.assign(bufferLength, a); + + // Initialize MetaData + InitializeMetaData( metadata ); + metadata_buf.assign(bufferLength, metadata); + + ready_for_input = new omni_semaphore(bufferLength); + data_ready = new omni_semaphore(0); + + +} + +standardInterfacesMD_i::complexShort_p::complexShort_p(const char* _name, const char* _domain, unsigned int bufLen) : portName(_name), bufferLength(bufLen), rdPtr(0), wrPtr(0) +{ + ossieSupport::ORB orb; + + data_servant = new complexShort::providesPort(this); + data_servant_var = data_servant->_this(); + + PortTypes::ShortSequence a; + I_buf.assign(bufferLength, a); + Q_buf.assign(bufferLength, a); + + // Initialize MetaData + InitializeMetaData( metadata ); + metadata_buf.assign(bufferLength, metadata); + + ready_for_input = new omni_semaphore(bufferLength); + data_ready = new omni_semaphore(0); + + std::string objName; + objName = _domain; + objName += "/"; + objName += _name; + + orb.bind_object_to_name((CORBA::Object_ptr) data_servant_var, objName.c_str()); +} + +standardInterfacesMD_i::complexShort_p::~complexShort_p() +{ + +} + +CORBA::Object_ptr standardInterfacesMD_i::complexShort_p::getPort(const char* _portName) +{ + if (portName == _portName) + return CORBA::Object::_duplicate(data_servant_var); + else + return CORBA::Object::_nil(); +} + +void standardInterfacesMD_i::complexShort_p::bufferEmptied() +{ + ready_for_input->post(); +} + + +void standardInterfacesMD_i::complexShort_p::getData( + PortTypes::ShortSequence* &I, + PortTypes::ShortSequence* &Q, + standardInterfacesMD::MetaData* &packet_data) +{ + data_ready->wait(); + + I = &I_buf[rdPtr]; + Q = &Q_buf[rdPtr]; + packet_data = &metadata_buf[rdPtr]; + rdPtr = (++rdPtr) % bufferLength; +} + + +void standardInterfacesMD_i::complexShort_p::getData(PortTypes::ShortSequence* &I, PortTypes::ShortSequence* &Q) +{ + data_ready->wait(); + + I = &I_buf[rdPtr]; + Q = &Q_buf[rdPtr]; + rdPtr = (++rdPtr) % bufferLength; +} + +complexShort::providesPort::providesPort(standardInterfacesMD_i::complexShort_p* _base) : base(_base) +{ + +} + +complexShort::providesPort::~providesPort() +{ + +} + +void complexShort::providesPort::pushPacket( + const PortTypes::ShortSequence &I, + const PortTypes::ShortSequence &Q) +{ + base->ready_for_input->wait(); + + (base->I_buf)[base->wrPtr] = I; + (base->Q_buf)[base->wrPtr] = Q; + + // Create blank metadata object and add it to buffer + standardInterfacesMD::MetaData metadata; + InitializeMetaData( metadata ); + (base->metadata_buf)[base->wrPtr] = metadata; + + base->wrPtr = (++(base->wrPtr)) % base->bufferLength; + + base->data_ready->post(); +} + +void complexShort::providesPort::pushPacketMetaData( + const PortTypes::ShortSequence &I, + const PortTypes::ShortSequence &Q, + const standardInterfacesMD::MetaData &packet_data) +{ + base->ready_for_input->wait(); + + (base->I_buf)[base->wrPtr] = I; + (base->Q_buf)[base->wrPtr] = Q; + + // Deep copy meta data to complexShort_p base and add it to the buffer + base->metadata = packet_data; + (base->metadata_buf)[base->wrPtr] = packet_data; + + base->wrPtr = (++(base->wrPtr)) % base->bufferLength; + + base->data_ready->post(); +} Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/genDocs.py =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/genDocs.py (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/genDocs.py (revision 8424) @@ -0,0 +1,32 @@ +#!/usr/bin/env python + +import os + +def convertEPStoPNG(imgfilename): + '''converts .eps file to .png''' + # Try using command-line "convert" + epsfilename = imgfilename + pngfilename = os.path.splitext(imgfilename)[0] + '.png' + if os.system('convert ' + epsfilename + ' -resize 70% ' + pngfilename) != 0: + print "could not convert " + epsfilename + " using ImageMagick" + return False + return True + +def convertDirectoryEPStoPNG(imgdir): + '''converts .eps files to .png for a given directory''' + for i in os.listdir(imgdir): + imgfile = os.path.splitext(i) + if imgfile[1].lower() == ".eps": + print "converting " + imgdir + i + "..." + if convertEPStoPNG(imgdir + i) != True: + print "error" + +if __name__ == "__main__": + print "generating documentation..." + + # convert all .eps files in directory to .png + convertDirectoryEPStoPNG('img/') + + # run doxygen on default Doxyfile + os.system('doxygen Doxyfile') + Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/Makefile.am =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/Makefile.am (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/Makefile.am (revision 8424) @@ -0,0 +1,59 @@ +%.pp.idl : %.idl + @CC@ -E -x c++ $< > $@ + +%SK.cpp %.h %DynSK.cpp : %.idl + @IDL@ @IDL_FLAGS@ -bcxx -Wba -Wbd=DynSK.cpp -Wbh=.h -Wbs=SK.cpp -Wbkeep_inc_path -Wbuse_quotes $< + cp $*.h include/standardinterfaces-metadata + +SUBDIRS = include python + +BUILT_SOURCES = \ + realCharMDSK.cpp \ + complexShortMDSK.cpp \ + RadioMetaDataSK.cpp + +nodist_pkginclude_HEADERS = \ + realCharMD.h \ + complexShortMD.h \ + RadioMetaData.h + +AM_CXXFLAGS = -Wall -g + +INCLUDES = -I./include + +pkginclude_HEADERS = \ + realCharMD.idl \ + complexShortMD.idl \ + RadioMetaData.idl + +pkgconfigdir = $(libdir)/pkgconfig + +dist_pkgconfig_DATA = standardInterfaces-metadata.pc + +lib_LTLIBRARIES = libstandardInterfaces_metadata.la + +libstandardInterfaces_metadata_la_SOURCES = \ + realCharMD_u.cpp realCharMD_p.cpp \ + complexShortMD_u.cpp complexShortMD_p.cpp \ + RadioMetaData.cpp \ + RadioMetaData_u.cpp RadioMetaData_p.cpp + +nodist_libstandardInterfaces_metadata_la_SOURCES = \ + realCharMDSK.cpp \ + complexShortMDSK.cpp \ + RadioMetaDataSK.cpp + +libstandardInterfaces_metadata_la_LDFLAGS = -version-info 0:6:0 + +CLEANFILES = \ + realCharMD.h realCharMDSK.cpp \ + complexShortMD.h complexShortMDSK.cpp \ + RadioMetaData.h RadioMetaDataSK.cpp + +# ---------- documentation --------- +.PHONY: docs documentation + +docs : + ./genDocs.py + + Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/realCharMD.idl =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/realCharMD.idl (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/realCharMD.idl (revision 8424) @@ -0,0 +1,37 @@ +/**************************************************************************** + +Copyright 2005,2006 Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Standard Interfaces. + +OSSIE Standard Interfaces are free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +OSSIE Standard Interfaces is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with OSSIE Standard Interfaces; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +****************************************************************************/ + + +#include "ossie/PortTypes.idl" +#include "RadioMetaData.idl" + +module standardInterfacesMD { + + interface realCharMD { + void pushPacket(in PortTypes::CharSequence I); + + void pushPacketMetaData( + in PortTypes::CharSequence I, + in MetaData packet_data); + }; +}; Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/reconf =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/reconf (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/reconf (revision 8424) @@ -0,0 +1,6 @@ +#!/bin/sh + +rm -f config.cache +aclocal +autoconf +automake --foreign --add-missing Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/complexShortMD_u.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/complexShortMD_u.cpp (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces-metadata/complexShortMD_u.cpp (revision 8424) @@ -0,0 +1,138 @@ +/**************************************************************************** + +Copyright 2006, Virginia Polytechnic Institute and State University + +This file is part of the OSSIE Core Framework. + +OSSIE Core Framework is free software; you can redistribute it and/or modify +it under the terms of the Lesser GNU General Public License as published by +the Free Software Foundation; either version 2.1 of the License, or +(at your option) any later version. + +OSSIE Core Framework is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +Lesser GNU General Public License for more details. + +You should have received a copy of the Lesser GNU General Public License +along with OSSIE Core Framework; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +****************************************************************************/ + +#include + +#include + +#include "standardinterfaces-metadata/complexShortMD_u.h" +#include "ossie/debug.h" + +standardInterfacesMD_i::complexShort_u::complexShort_u(const char* _portName) +{ + portName = _portName; + + data_servant = new complexShort::usesPort(this); + data_servant_var = data_servant->_this(); + + // initialize meta data + InitializeMetaData( metadata ); +} + +standardInterfacesMD_i::complexShort_u::complexShort_u(const char* _name, const char* _domain) : portName(_name) +{ + ossieSupport::ORB orb; + + data_servant = new complexShort::usesPort(this); + data_servant_var = data_servant->_this(); + + std::string objName; + objName = _domain; + objName += "/"; + objName += _name; + + orb.bind_object_to_name((CORBA::Object_ptr) data_servant_var, objName.c_str()); + + // initialize meta data + InitializeMetaData( metadata ); +} + +standardInterfacesMD_i::complexShort_u::~complexShort_u() +{ + +} + +CORBA::Object_ptr standardInterfacesMD_i::complexShort_u::getPort(const char* _portName) +{ + if (portName == _portName) + return CORBA::Object::_duplicate(data_servant_var); + else + return CORBA::Object::_nil(); +} + + +void standardInterfacesMD_i::complexShort_u::pushPacket( + const PortTypes::ShortSequence &I, + const PortTypes::ShortSequence &Q, + const standardInterfacesMD::MetaData &packet_data) +{ + // update packet meta data + metadata = packet_data; + + omni_mutex_lock l(port_mutex); + for (unsigned int i = 0; i < dest_ports.size(); ++i) { + dest_ports[i].port_obj->pushPacketMetaData(I, Q, metadata); + } +} + +void standardInterfacesMD_i::complexShort_u::pushPacket( + const PortTypes::ShortSequence &I, + const PortTypes::ShortSequence &Q) +{ + omni_mutex_lock l(port_mutex); + for (unsigned int i = 0; i < dest_ports.size(); ++i) { + dest_ports[i].port_obj->pushPacket(I, Q); + } +} + +complexShort::usesPort::usesPort(standardInterfacesMD_i::complexShort_u *_base) : base(_base) +{ +} + +complexShort::usesPort::~usesPort() +{ +} + +void complexShort::usesPort::connectPort(CORBA::Object_ptr connection, const char* connectionID) +{ + standardInterfacesMD::complexShortMD_ptr p = standardInterfacesMD::complexShortMD::_narrow(connection); + if (CORBA::is_nil(p)) { + std::cout << "Print port is not complexShort" << std::endl; + return; + } + + omni_mutex_lock l(base->port_mutex); + for (unsigned int i = 0; i < base->dest_ports.size(); ++i) { + if (strcmp(base->dest_ports[i].getID(), connectionID) == 0) { + base->dest_ports[i].setPort(p); + return; + } + } + + complexShort::ConnectionInfo c(p, connectionID); + base->dest_ports.push_back(c); + +} + +void complexShort::usesPort::disconnectPort(const char* connectionID) +{ + omni_mutex_lock l(base->port_mutex); + for (unsigned int i = 0; i < base->dest_ports.size(); ++i) { + if (strcmp(base->dest_ports[i].getID(), connectionID) == 0) { + base->dest_ports.erase(base->dest_ports.begin() + i); + return; + } + } + + DEBUG(5, StandardInterfaces, "Attempted to disconnect non-existent connection: " << connectionID); + +} Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces/python/Makefile.am =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces/python/Makefile.am (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces/python/Makefile.am (revision 8424) @@ -0,0 +1,30 @@ +IDL_BIN = $(shell which omniidl) + +all: + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfaces -Wbinline ../realChar.idl + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfaces -Wbinline ../realShort.idl + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfaces -Wbinline ../realLong.idl + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfaces -Wbinline ../realFloat.idl + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfaces -Wbinline ../realDouble.idl + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfaces -Wbinline ../complexShort.idl + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfaces -Wbinline ../complexFloat.idl + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfaces -Wbinline ../complexDouble.idl + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfaces -Wbinline ../complexChar.idl + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfaces -Wbinline ../complexLong.idl + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfaces -Wbinline ../Radio_Control.idl + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfaces -Wbinline ../FM_Control.idl + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfaces -Wbinline ../soundControl.idl + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfaces -Wbinline ../stereoSound.idl + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfaces -Wbinline ../sampleRateConvertorControl.idl + +install-data-local: + rm -rf $(DESTDIR)$(pythondir)/ossie/standardinterfaces + mkdir -p $(DESTDIR)$(pythondir)/ossie/standardinterfaces + cp -R ossie/standardinterfaces $(DESTDIR)$(pythondir)/ossie + +distclean: + rm -rf ossie + +clean: + rm -rf ossie + Index: /siedev/branches/ssayed/devs/src/system/standardInterfaces/python/generatepythonbindings.py =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces/python/generatepythonbindings.py (revision 5856) +++ (revision ) @@ -1,29 +1,0 @@ -#! /usr/bin/env python - -import sys -import os - -idl_files = [ - 'realChar.idl', - 'realShort.idl', - 'realLong.idl', - 'realFloat.idl', - 'realDouble.idl', - 'complexShort.idl', - 'complexFloat.idl', - 'complexDouble.idl', - 'complexChar.idl', - 'complexLong.idl', - 'Radio_Control.idl', - 'FM_Control.idl', - 'soundControl.idl', - 'stereoSound.idl', - 'sampleRateConvertorControl.idl',] - - -for f in idl_files: - cmd = 'omniidl -bpython -I/usr/local/include -Wbpackage=ossie.standardinterfaces -Wbinline ../' + f - print cmd - os.system(cmd) - - Index: /siedev/branches/ssayed/devs/src/system/standardInterfaces/python/Makefile.in =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces/python/Makefile.in (revision 5786) +++ (revision ) @@ -1,14 +1,0 @@ -all: - python generatepythonbindings.py - -install: - python setup.py install - chmod -R 777 build - -distclean: - rm -rf ossie - rm -rf build - -clean: - rm -rf ossie - rm -rf build Index: /siedev/branches/ssayed/devs/src/system/standardInterfaces/python/setup.py =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces/python/setup.py (revision 5738) +++ (revision ) @@ -1,25 +1,0 @@ -#! /usr/bin/env python - -from distutils.core import setup -import sys - -if len(sys.argv) != 2: - sys.exit(1) - -packagename = 'standardinterfaces' -subpackages = ['standardInterfaces'] - - -packagelist = ['ossie', 'ossie.'+packagename] -for s in subpackages: - packagelist.append('ossie.' + packagename + '.' + s) - packagelist.append('ossie.' + packagename + '.' + s + '__POA') - -setup(name='ossie', - version='0.6.2', - author='OSSIE Team', - url='http://ossie.wireless.vt.edu/', - description='python bindings for the OSSIE standard interfaces IDL', - packages=packagelist, - ) - Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces/configure.ac =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces/configure.ac (revision 5785) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces/configure.ac (revision 8424) @@ -16,4 +16,6 @@ AC_CHECK_PROG([IDL], [omniidl], [omniidl], [AC_MSG_ERROR([cannot find omniidl prgram])]) +AM_PATH_PYTHON([2.5]) + AC_LANG_POP @@ -25,5 +27,10 @@ AC_SUBST(IDL_FLAGS) -AC_CONFIG_FILES(Makefile python/Makefile include/Makefile include/standardinterfaces/Makefile standardInterfaces.pc) +AC_CONFIG_FILES( + Makefile + python/Makefile + include/Makefile + include/standardinterfaces/Makefile + standardInterfaces.pc) AC_OUTPUT Index: /ossiedev/branches/ssayed/devs/src/system/standardInterfaces/Makefile.am =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/standardInterfaces/Makefile.am (revision 5785) +++ /ossiedev/branches/ssayed/devs/src/system/standardInterfaces/Makefile.am (revision 8424) @@ -1,7 +1,9 @@ +IDL_BIN = $(shell which omniidl) + %.pp.idl : %.idl - @CC@ -E -x c++ $< > $@ + gcc -E -x c++ $< > $@ %SK.cpp %.h %DynSK.cpp : %.idl - @IDL@ @IDL_FLAGS@ -bcxx -Wba -Wbd=DynSK.cpp -Wbh=.h -Wbs=SK.cpp -Wbkeep_inc_path $< + $(IDL_BIN) -I/usr/local/include -bcxx -Wba -Wbd=DynSK.cpp -Wbh=.h -Wbs=SK.cpp -Wbkeep_inc_path -Wbuse_quotes $< cp $*.h include/standardinterfaces @@ -22,5 +24,5 @@ soundControlSK.cpp \ stereoSoundSK.cpp \ - Radio_ControlSK.cpp + Radio_ControlSK.cpp nodist_pkginclude_HEADERS = \ @@ -36,7 +38,7 @@ complexLong.h \ FM_Control.h \ - soundControl.h \ + soundControl.h \ stereoSound.h \ - Radio_Control.h + Radio_Control.h AM_CXXFLAGS = -Wall -g @@ -59,5 +61,5 @@ soundControl.idl \ stereoSound.idl \ - sampleRateConvertorControl.idl + sampleRateConvertorControl.idl pkgconfigdir = $(libdir)/pkgconfig @@ -92,5 +94,5 @@ complexCharSK.cpp \ complexLongSK.cpp \ - Radio_ControlSK.cpp + Radio_ControlSK.cpp libstandardInterfaces_la_LDFLAGS = -version-info 0:6:0 Index: /ossiedev/branches/ssayed/devs/src/system/SigProc/sequencing.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/SigProc/sequencing.cpp (revision 4844) +++ /ossiedev/branches/ssayed/devs/src/system/SigProc/sequencing.cpp (revision 8424) @@ -26,5 +26,5 @@ #include "SigProc.h" - +#include namespace SigProc { Index: /ossiedev/branches/ssayed/devs/src/system/SigProc/modem.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/SigProc/modem.cpp (revision 5252) +++ /ossiedev/branches/ssayed/devs/src/system/SigProc/modem.cpp (revision 8424) @@ -22,5 +22,5 @@ #include "SigProc.h" - +#include namespace SigProc { Index: /ossiedev/branches/ssayed/devs/src/system/SigProc/utility.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/SigProc/utility.cpp (revision 5533) +++ /ossiedev/branches/ssayed/devs/src/system/SigProc/utility.cpp (revision 8424) @@ -22,5 +22,6 @@ #include "SigProc.h" - +#include +#include namespace SigProc { Index: /ossiedev/branches/ssayed/devs/src/system/SigProc/butter.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/SigProc/butter.cpp (revision 5571) +++ /ossiedev/branches/ssayed/devs/src/system/SigProc/butter.cpp (revision 8424) @@ -38,5 +38,5 @@ #include "SigProc.h" - +#include namespace SigProc { Index: /ossiedev/branches/ssayed/devs/src/system/SigProc/filters.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/SigProc/filters.cpp (revision 6493) +++ /ossiedev/branches/ssayed/devs/src/system/SigProc/filters.cpp (revision 8424) @@ -22,5 +22,6 @@ #include "SigProc.h" - +#include +#include namespace SigProc { Index: /ossiedev/branches/ssayed/devs/src/system/SigProc/scaling.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/SigProc/scaling.cpp (revision 4528) +++ /ossiedev/branches/ssayed/devs/src/system/SigProc/scaling.cpp (revision 8424) @@ -22,5 +22,6 @@ #include "SigProc.h" - +#include +#include namespace SigProc { Index: /ossiedev/branches/ssayed/devs/src/system/SigProc/sources.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/SigProc/sources.cpp (revision 4766) +++ /ossiedev/branches/ssayed/devs/src/system/SigProc/sources.cpp (revision 8424) @@ -22,5 +22,5 @@ #include "SigProc.h" - +#include namespace SigProc { Index: /ossiedev/branches/ssayed/devs/src/system/SigProc/pll.cpp =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/SigProc/pll.cpp (revision 4528) +++ /ossiedev/branches/ssayed/devs/src/system/SigProc/pll.cpp (revision 8424) @@ -22,5 +22,5 @@ #include "SigProc.h" - +#include namespace SigProc { Index: /ossiedev/branches/ssayed/devs/src/system/customInterfaces/customInterfaces.pc =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/customInterfaces/customInterfaces.pc (revision 5782) +++ /ossiedev/branches/ssayed/devs/src/system/customInterfaces/customInterfaces.pc (revision 8424) @@ -1,3 +1,3 @@ -prefix=/usr/local +prefix=/opt/sdr/ includedir=${prefix}/include Index: /ossiedev/branches/ssayed/devs/src/system/customInterfaces/python/Makefile.am =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/customInterfaces/python/Makefile.am (revision 8424) +++ /ossiedev/branches/ssayed/devs/src/system/customInterfaces/python/Makefile.am (revision 8424) @@ -0,0 +1,18 @@ +IDL_BIN = $(shell which omniidl) + +all: + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.custominterfaces -Wbinline ../charArray.idl + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.custominterfaces -Wbinline ../customInterfaces.idl + $(IDL_BIN) -bpython -I/usr/local/include -Wbpackage=ossie.custominterfaces -Wbinline ../timingStatus.idl + +install-data-local: + rm -rf $(DESTDIR)$(pythondir)/ossie/custominterfaces + mkdir -p $(DESTDIR)$(pythondir)/ossie/custominterfaces + cp -R ossie/custominterfaces $(DESTDIR)$(pythondir)/ossie + +distclean: + rm -rf ossie + +clean: + rm -rf ossie + Index: /siedev/branches/ssayed/devs/src/system/customInterfaces/python/generatepythonbindings.py =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/customInterfaces/python/generatepythonbindings.py (revision 5857) +++ (revision ) @@ -1,17 +1,0 @@ -#! /usr/bin/env python - -import sys -import os - -idl_files = [ - 'charArray.idl', - 'customInterfaces.idl', - 'timingStatus.idl',] - - -for f in idl_files: - cmd = 'omniidl -bpython -I/usr/local/include -Wbpackage=ossie.custominterfaces -Wbinline ../' + f - print cmd - os.system(cmd) - - Index: /siedev/branches/ssayed/devs/src/system/customInterfaces/python/Makefile.in =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/customInterfaces/python/Makefile.in (revision 5783) +++ (revision ) @@ -1,14 +1,0 @@ -all: - python generatepythonbindings.py - -install: - python setup.py install - chmod -R 777 build - -distclean: - rm -rf ossie - rm -rf build - -clean: - rm -rf ossie - rm -rf build Index: /siedev/branches/ssayed/devs/src/system/customInterfaces/python/setup.py =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/customInterfaces/python/setup.py (revision 5739) +++ (revision ) @@ -1,25 +1,0 @@ -#! /usr/bin/env python - -from distutils.core import setup -import sys - -if len(sys.argv) != 2: - sys.exit(1) - -packagename = 'custominterfaces' -subpackages = ['customInterfaces'] - - -packagelist = ['ossie', 'ossie.'+packagename] -for s in subpackages: - packagelist.append('ossie.' + packagename + '.' + s) - packagelist.append('ossie.' + packagename + '.' + s + '__POA') - -setup(name='ossie', - version='0.6.2', - author='OSSIE Team', - url='http://ossie.wireless.vt.edu/', - description='python bindings for the OSSIE custom interfaces IDL', - packages=packagelist, - ) - Index: /ossiedev/branches/ssayed/devs/src/system/customInterfaces/configure.ac =================================================================== --- /ossiedev/branches/ssayed/devs/src/system/customInterfaces/configure.ac (revision 5782) +++ /ossiedev/branches/ssayed/devs/src/system/customInterfaces/configure.ac (revision 8424) @@ -3,4 +3,6 @@ AM_INIT_AUTOMAKE(nostdinc) + +AM_PATH_PYTHON([2.5]) AC_PROG_CC