Timeline
11/21/07:
- 13:01 Ticket #47 ((195) Flex1800 db's can not be supported until dbid's (0x0034 and 0x0035) ...) closed by
- wontfix: No further comments. Closing bug.
- 12:46 Changeset [5832] by
- Initial update for GPP, moves all SCA implementation code into the GPP …
11/19/07:
- 12:08 Changeset [5824] by
- formatting
- 11:46 Changeset [5823] by
- added basic description of what the dependencies are for
- 11:31 Changeset [5822] by
- fixing typos, latex now compiles
- 11:21 Changeset [5821] by
- added an appendix for creating omniNames.sh
- 11:07 Changeset [5820] by
- removed the mention of c\_wavLoader
- 10:59 Changeset [5819] by
- added better description of ALF
- 10:52 Changeset [5818] by
- added instructions for creating an ossie.pth file
- 10:29 Changeset [5817] by
- removed references to /home/sca. removed instructions to run OWD from …
- 10:19 Changeset [5816] by
- adding listings to included packages
- 09:43 Changeset [5815] by
- added figure for alf section that shows what a uses port looks like and …
11/18/07:
- 14:22 Changeset [5813] by
- adding line break in authors tag on front page
11/17/07:
- 09:23 Changeset [5807] by
- fixing typo
11/16/07:
- 17:41 Ticket #99 (make install for 0.6.2 release failing on python scripts) closed by
- invalid: The original error was an omniORBpy problem - the error message just …
- 17:24 Ticket #99 (make install for 0.6.2 release failing on python scripts) created by
- During the make install for 0.6.2, it is failing with the following …
- 16:37 Ticket #94 (Build.py script does not install tools or plug-ins) closed by
- fixed
- 16:36 Ticket #96 (Waveforms created with OWD install in the wrong directory when using ...) closed by
- fixed
- 16:36 Ticket #95 (Right-click does not work in the Launch Waveform frame in ALF) closed by
- invalid: This functionality has been removed, so this is no longer an issue.
- 16:33 Ticket #93 (make needs to execute python script to generate idl python bindings) closed by
- fixed: This has been resolved.
- 13:18 Changeset [5806] by
- removing antiquated modem functions
- 12:06 Changeset [5805] by
- adding functionality to scale demodulator levels
- 10:56 Changeset [5804] by
- adjusting mutliply_factor in plot to keep I/Q from auto-scaling
- 10:37 Changeset [5803] by
- decreasing verbosity
- 10:36 Changeset [5802] by
- adding phase offset in ossie demo, see r5801
- 10:35 Changeset [5801] by
- adding phase offset property to channel demo component
- 09:51 Changeset [5800] by
- fixing bug where I-channel was compared twice and Q-channel was ignored
- 08:33 Changeset [5799] by
- initial import of demodulator functions
- 08:22 Ticket #98 (Rewrite Application Factory and friends) created by
- Application Factory is a complex function and needs a complete overhaul in …
- 07:58 Ticket #97 (Complete ossieComponent class) created by
- ossieComponent tries to hide the component startup and shutdown code from …
11/15/07:
- 21:33 Changeset [5798] by
- chaning variable names to be more descriptive
- 21:21 Changeset [5797] by
- Implemented Vuk's revision suggestions.
- 18:32 Changeset [5796] by
- auto-installing tools
- 18:26 Changeset [5795] by
- fixing imports
- 18:26 Changeset [5794] by
- fixing imports
- 18:25 Changeset [5793] by
- fixing imports
- 18:25 Changeset [5792] by
- fixing imports
- 18:25 Changeset [5791] by
- fixing imports
- 18:25 Changeset [5790] by
- fixing import statements
- 17:48 Changeset [5789] by
- Fixed a variety of typos, grammatical errors, formatting issues, and …
- 17:37 Changeset [5788] by
- Works with boost 1.33 again.
- 17:26 Changeset [5787] by
- fixing changes to import for new installation of python idl bindings
- 17:02 Changeset [5786] by
- adding Makefile.in to python idl directory
- 16:52 Changeset [5785] by
- adding distclean target
- 16:52 Changeset [5784] by
- adding distclean target
- 16:50 Changeset [5783] by
- adding makefile to python dir
- 16:49 Changeset [5782] by
- adding python generation scripts to make for custominterfaces
- 16:43 Changeset [5781] by
- adding python subdirectory to Makefile.am under idl
- 16:37 Changeset [5780] by
- adding Makefile.in to build python bindings and install them
- 16:37 Changeset [5779] by
- added waveform name in generated make file.
- 16:04 Changeset [5778] by
- waveforms should install to waveforms/waveform_name
- 15:48 Changeset [5777] by
- added ossieComponent.cpp
- 15:22 Changeset [5776] by
- Added authors of previous manual.
- 15:19 Changeset [5775] by
- Completed further reading section.
- 15:00 Changeset [5774] by
- Added missing href texts.
- 14:58 Changeset [5773] by
- Fixed USRP instructions some more.
- 14:58 Changeset [5772] by
- Updated USRP instructions to use GNURadio version 3.1.1.
- 14:52 Changeset [5771] by
- Uploading screenshots (I know they're binaries but jd told me to).
- 14:15 Changeset [5770] by
- fixing typo
- 14:10 Changeset [5769] by
- clarifying that modulator must have at least one bit/symbol
- 14:06 Changeset [5768] by
- minor changes
- 13:31 Changeset [5767] by
- More small updates…
- 13:21 Changeset [5766] by
- s/\~/$\sim$/
- 13:17 Changeset [5765] by
- More updates.
- 13:04 Changeset [5764] by
- adding functionality to PAM level calculation, unit test
- 12:59 Changeset [5763] by
- adding energy scaling test for PSK, rectangular QAM; reducing verbosity of …
- 12:55 Changeset [5762] by
- Better introduction.
- 12:48 Changeset [5761] by
- shereef: adding ossieComponent and ossieSupport
- 12:45 Changeset [5760] by
- changing interfaces to modulator create/init
- 12:34 Changeset [5759] by
- Renamed.
- 12:34 Changeset [5758] by
- Changed to reflect name changes.
- 12:32 Changeset [5757] by
- Incorporated many comments from the peer review.
- 12:13 Ticket #96 (Waveforms created with OWD install in the wrong directory when using ...) created by
- When building a waveform created with OWD using autotools (./reconf;....; …
- 12:09 Ticket #95 (Right-click does not work in the Launch Waveform frame in ALF) created by
- Right-click does not work in the Launch Waveform frame in ALF. It is …
- 12:06 Ticket #94 (Build.py script does not install tools or plug-ins) created by
- The build.py script should copy the tools to /sdr/tools and do a make …
- 11:33 Changeset [5756] by
- Fixing 0.6.2 scripts
- 11:28 Changeset [5755] by
- Remove extra copy. My bad
- 11:27 Changeset [5754] by
- Creating 0.6.2 Release branch
- 11:24 Changeset [5753] by
- Creating 0.6.2 Release branch
- 11:21 Changeset [5752] by
- Creating 0.6.2 release branch
- 10:58 Changeset [5751] by
- adding scaling factor for rectangular QAM (32, 128)
- 09:14 Changeset [5750] by
- moving to math.h definition of pi, M_PI
- 09:12 Changeset [5749] by
- clarifying that rectangular QAM is square if bits_per_symbol is even
11/14/07:
- 21:19 Changeset [5748] by
- Fixed some formatting.
- 21:13 Changeset [5747] by
- Updated with the version I actually worked on :).
- 20:56 Changeset [5746] by
- Updated to build draft.
- 20:56 Changeset [5745] by
- Renamed outline to draft.
- 20:23 Changeset [5744] by
- Changed makefile to build only the user guide draft.
- 20:23 Changeset [5743] by
- Initial import of the user guide draft.
- 19:00 Changeset [5742] by
- finalizing modulator initialization
- 17:20 Changeset [5741] by
- adding more functionality to modem
- 16:08 Changeset [5740] by
- Attempt to fix boost 1.34 problem.
- 14:54 Changeset [5739] by
- adding script to generate python bindings for custom interfaces idl
- 14:47 Changeset [5738] by
- as per ticket #93, adding scripts to generate and install python bindings
- 14:46 Ticket #93 (make needs to execute python script to generate idl python bindings) created by
- GNU make is such a pain. I can get the autoconf junk to run {{{omniidl …
- 14:31 Changeset [5737] by
- gnu make sucks; moving to python script to generate python bindings
- 14:16 Changeset [5736] by
- forgot to add setup.py
- 13:50 Changeset [5735] by
- configuring standardinterfaces 0.6.2 to automatically generate python …
- 13:22 Changeset [5734] by
- automating cf idl python bindings for 0.6.2 release
- 11:47 Ticket #85 (OWD 0.6.2 branch generates main.cpp for CF trunk) closed by
- fixed: resolved with changesets 5731 and 5732
- 11:46 Changeset [5732] by
- reverting to old main.cpp file generation for basic ports components
- 11:45 Changeset [5731] by
- reverting to old main.cpp file generation for custom ports components
- 11:34 Ticket #26 ((219) python component generation not completeley supported in OWD) closed by
- fixed: fixed this a while ago, forgot to close the ticket
11/13/07:
- 16:19 Changeset [5727] by
- Make fork test failure message a little clearer.
- 14:27 SffsdrLinux edited by
- (diff)
- 08:59 Changeset [5722] by
- adding gray encoder/decoder
11/12/07:
- 17:35 Changeset [5721] by
- first cut at generalizing modem
- 15:48 Changeset [5720] by
- cleaning up Doxygen
- 15:47 Changeset [5719] by
- using the built-in math M_PI value
- 15:40 Changeset [5718] by
- cleaning up modem functions
- 15:19 Changeset [5717] by
- oops
- 15:18 Changeset [5716] by
- removing unnecessary arctan function
- 15:15 Changeset [5715] by
- removing unnecessary dot_product functions
- 14:44 Changeset [5714] by
- removing files, more code for 0.6.2 release
- 14:42 Changeset [5713] by
- removing the function to design gaussian filter
- 14:30 Changeset [5712] by
- removing convolutional coding for 0.6.2 release
11/11/07:
- 15:56 Changeset [5710] by
- adding thresholds for QAM4 (essentially QPSK with a pi/4 phase shift) and …
- 15:35 Changeset [5709] by
- adding scaling values for QAM and PAM modulation schemes
- 14:55 Changeset [5708] by
- changing inclusion macro (prevents multiple inclusions
- 14:52 Changeset [5707] by
- trivial comment changes
11/09/07:
- 23:37 Changeset [5706] by
- Updated version to 0.6.2.
- 23:37 Changeset [5705] by
- Updated version to 0.6.2.
- 23:30 Changeset [5704] by
- Updated version to 0.6.2.
- 23:29 Changeset [5703] by
- Updated version number to 0.6.2.
11/08/07:
- 16:39 SffsdrLinux edited by
- (diff)
- 10:45 Contact edited by
- (diff)
- 10:45 SffsdrLinux edited by
- (diff)
11/07/07:
- 18:37 Ticket #92 (iir_filter/butterworth prototype in SigProc becomes unstable for ...) created by
- Overflow occurs on output of the filter when the order is large and the …
11/06/07:
- 16:56 Changeset [5700] by
- Removing old development branch.
- 16:56 Changeset [5699] by
- Removing old development branch.
- 16:55 Changeset [5698] by
- Removing old development branch.
- 10:52 Changeset [5697] by
- Reverting LDFLAGS -version-info to 0:6:0 because of breakage.
11/04/07:
- 03:04 Changeset [5696] by
- fixing stability; pack it, ship it
- 01:45 Changeset [5695] by
- decreasing verbosity
- 01:41 Changeset [5694] by
- ignoring backup channel; switching to scan mode
- 01:53 Changeset [5693] by
- still trying to fix bug with switching to backup channel
- 01:52 Changeset [5692] by
- adjusting phasing pattern lengths for frames with different application …
- 01:35 Changeset [5691] by
- trying to fix backup channel…
- 01:21 Changeset [5690] by
- fixing bug; remembering current channel
- 01:16 Changeset [5689] by
- setting backup channel properly
- 01:01 Changeset [5688] by
- adding backup channel to control; improving stability
- 00:30 Changeset [5687] by
- dwelling on channel for better synchronization
11/03/07:
- 20:13 Changeset [5686] by
- testing with only 4 channels; not moving out of channel if classifer …
- 19:44 Changeset [5685] by
- finalizing channel score for all 14 FRS channels
- 18:31 Changeset [5684] by
- functionalizing channel selection based on score
- 18:20 Changeset [5683] by
- adding code for scoring channels based on sensing
- 17:56 Changeset [5682] by
- sending reply to beacon frame
- 17:45 Changeset [5681] by
- hacking port id to scan properly
- 17:36 Changeset [5680] by
- hacking port ID such that CIREN_SM knows if transmitted data are app data …
- 17:14 Changeset [5679] by
- decreasing verbosity
- 17:13 Changeset [5678] by
- decreasing verbosity
- 17:13 Changeset [5677] by
- decreasing verbosity
- 17:03 Changeset [5676] by
- improving op modes of CIREN_SM; now sends beacons periodically
- 17:00 Changeset [5675] by
- Updated version number to 0.6.2.
- 16:59 Changeset [5674] by
- Updated version number to 0:6:2; explicitly included /usr/include.
- 16:55 Changeset [5673] by
- Updated version number to 0.6.2
- 16:17 Changeset [5672] by
- configuring special beacon frame
- 16:13 Changeset [5671] by
- using port_id to flag if crc was passed correctly
- 16:12 Changeset [5670] by
- configuring beacon control frame
- 16:11 Changeset [5669] by
- configuring beacon control frame
- 14:13 Changeset [5668] by
- prelimiary changes for beacon signal
11/02/07:
- 15:00 Changeset [5667] by
- switching from scan to dwell during TX
- 14:45 Changeset [5666] by
- channel sensing seems to work decently
- 13:12 Changeset [5665] by
- classifier kinda works; needs to be improved
- 11:22 Changeset [5664] by
- first cut at classifying FRS... kinda late, I know
- 11:00 Changeset [5662] by
- Adding signal detection and classification. Not functional yet, just a few …
- 10:31 Changeset [5661] by
- Adding signal detection and classification
- 10:30 Changeset [5660] by
- Creating branch. Adding signal detection and classification
- 10:29 Changeset [5659] by
- reverted WorkModules?.py to the pre-texthistory version
- 10:28 Changeset [5658] by
- Adding signal detection and classification
- 10:28 Changeset [5657] by
- Adding signal detection and classification
11/01/07:
- 21:05 Changeset [5656] by
- gui will ignore hitting enter on an empty box
- 20:52 Changeset [5655] by
- added some copy statements
- 20:41 Changeset [5654] by
- minor change
- 20:39 Changeset [5653] by
- minor change
- 20:32 Changeset [5652] by
- adding basic channel scanning capability; kinda slow
- 20:10 Changeset [5651] by
- removed a print statement
- 20:01 Changeset [5650] by
- Improved text history
- 19:26 Changeset [5649] by
- decreasing verbosity of frame assembler
- 19:22 Changeset [5648] by
- changing AGC once again
- 19:15 Changeset [5647] by
- using QPSK by default; setting random backoff for reply frame
- 18:58 Changeset [5646] by
- ignoring power control completely
- 18:52 Changeset [5645] by
- making push-to-talk button larger
- 18:50 Changeset [5644] by
- expanding tabs; python is picky
- 15:12 Changeset [5641] by
- perform only partial correlation on input
- 14:50 Changeset [5640] by
- ignoring power control
- 14:37 Changeset [5639] by
- more on control stability
- 14:36 Changeset [5638] by
- more control stability
- 14:36 Changeset [5637] by
- more control
- 14:04 Changeset [5636] by
- Added text history with time stamp
- 12:33 Changeset [5635] by
- fixing control to change FRS channels
- 12:33 Changeset [5634] by
- decreasing verbosity
- 12:32 Changeset [5633] by
- switching from data to control frames properly
- 12:32 Changeset [5632] by
- packet forwarding from control frames (app_id: 5)
- 12:31 Changeset [5631] by
- adjusting AGC properties in CIREN
- 12:12 Changeset [5630] by
- configuring control frame in FrameAssembler
- 10:02 Changeset [5628] by
- configuring frame type at receiver
- 09:51 Changeset [5627] by
- initializing frame type in FrameAssembler
10/31/07:
- 19:49 Changeset [5626] by
- stupid buffers; i hate them
- 19:49 Changeset [5625] by
- fixing control
- 19:49 Changeset [5624] by
- fixing control; adding power control
- 17:53 Changeset [5623] by
- oops... pushing control to wrong port
- 17:44 Changeset [5622] by
- fixing bug
- 17:41 Changeset [5621] by
- fixing bug
- 17:30 Changeset [5620] by
- ignoring bad ASCII
- 17:03 Changeset [5619] by
- pushing control to CIREN_CE
- 17:03 Changeset [5618] by
- pushing control packet to FrameAssembler
- 17:03 Changeset [5617] by
- adding EOM frame extraction; special BPSK control packet
- 16:26 Changeset [5616] by
- passing residual packets after RSSI decreases below predetermined …
- 15:42 Changeset [5615] by
- moving gain property to class member
- 15:37 Changeset [5614] by
- configuring end-of-frame control
- 15:37 Changeset [5613] by
- configuring control packets
- 14:22 Changeset [5612] by
- just send frame with each text packet
- 14:21 Changeset [5611] by
- new frame size for text data
- 14:21 Changeset [5610] by
- new frame size for text data
- 13:57 Changeset [5609] by
- reverting changes to sending ASCII text; filling buffer with dummy …
- 13:25 Changeset [5608] by
- fixing text_packet_counter
- 13:22 Changeset [5607] by
- breaking ASCII text data into separate packets
- 12:52 Changeset [5606] by
- configuring frame based upon application id
- 11:58 Changeset [5605] by
- adding loop to flush buffer in FrameAssembler when CVSD audio push-to-talk …
- 11:04 Changeset [5604] by
- fixing bug; forgot to add captured audio to buffer
- 09:36 Changeset [5603] by
- adding code to scramble blocks to maximize entropy of data bits
- 09:33 Changeset [5602] by
- adding code to generate sin wave instead of reading from mic
- 09:21 Changeset [5601] by
- removing logging defs, decreasing verbosity of debug statements
- 09:19 Changeset [5600] by
- setting default TX to FRS channel 3
- 08:10 Changeset [5599] by
- OWD tolerates missing <values> tags in simple sequence properties
10/30/07:
- 22:23 Changeset [5598] by
- initial import
- 22:22 Changeset [5597] by
- test waveform
- 22:22 Changeset [5596] by
- test waveform
- 22:22 Changeset [5595] by
- test waveform
- 16:35 Changeset [5594] by
- setting configuration such that modulation scheme is not changed if …
- 13:08 Changeset [5593] by
- adding destination and port identifiers
- 13:05 Changeset [5592] by
- adding subheader scrambler/unscrambler to preserve bit entropy
- 12:22 Ticket #81 (Spam Filtering not working) closed by
- fixed: Spam filtering is working now.
- 12:10 Ticket #58 (ossie installs dtd files with root as owner) closed by
- fixed: I am closing this bug and marking it as 'fixed', since it is taken care of …
- 11:39 Changeset [5591] by
- removing control packet transmission from CIREN_CE, adding debug …
- 11:02 Changeset [5590] by
- forgot to connect USRP to receiver... oops
- 10:46 Changeset [5589] by
- CIREN is here…
- 10:45 Changeset [5588] by
- initial directory structure
- 10:45 Changeset [5587] by
- initial directory structure
- 10:45 Changeset [5586] by
- initial directory structure
- 10:18 Changeset [5585] by
- reducing length of ramp up/phasing pattern
- 10:04 Changeset [5584] by
- adjusting loop filter coefficients to match changes in r5582:5583
- 10:04 Changeset [5583] by
- adjusting AGC values; changing FrameSynchronizer decimation rate from 8 to …
- 10:03 Changeset [5582] by
- decimating signal by a factor of 4 to reduce computational complexity of …
- 08:06 Changeset [5581] by
- adding function to scramble control packet so that the number of zeros and …
10/29/07:
- 18:51 Changeset [5580] by
- adding basic functionality to decode control frames
- 18:12 Changeset [5579] by
- fleshing out functionality of control packets/frames
- 17:31 Changeset [5578] by
- starting code to implement control forwarding
- 16:14 Changeset [5577] by
- fixing AGC in TimeDivisionDuplexDataTest? waveform to received 16-QAM with …
- 16:00 Changeset [5576] by
- adjusting timing loop filter coefficients once again; can track faster to …
- 14:10 Changeset [5575] by
- fixing bug where metadata modulation scheme is reset to BPSK
- 13:43 Changeset [5574] by
- getting rid of unnecessary comment
- 13:39 Changeset [5573] by
- removing costas loop processing block from frame synchronizer; consumes …
- 13:24 Changeset [5572] by
- moving to SigProc? function to design butterworth filter from r5569:5571
- 11:21 Changeset [5571] by
- integrating butterworth filter coefficient generation, tests into SigProc?
- 11:11 Changeset [5570] by
- copying butter test suite
- 11:10 Changeset [5569] by
- copying butterworth IIR filter coefficient generator file
- 11:05 Changeset [5568] by
- adding tests for butterworth LPF coefficient generation; compare to MATLAB
- 10:10 Changeset [5567] by
- adding function to calculate butterworth low-pass filter coefficients
10/28/07:
- 18:30 Changeset [5565] by
- configuring metadata for received data
- 18:17 Changeset [5564] by
- adding array of FRS channels
- 18:12 Changeset [5563] by
- adding 10-th order Butterworth IIR low-pass pre-filter to significantly …
- 17:15 Changeset [5562] by
- fixing bug in SigProc?, where IIR filter internal state is type-cast to …
- 15:06 Changeset [5561] by
- fixing code to re-acquire signal after link is lost due to interference
10/27/07:
- 14:03 Changeset [5559] by
- adjusting gain control as not to affect 16-QAM
- 12:48 Changeset [5558] by
- adding raised-cosine ramp up/down phasing pattern to reduce out-of-band …
- 12:30 Changeset [5557] by
- fixing bug in packet decoder where wrong operation mode is set when packet …
- 12:04 Changeset [5556] by
- vastly improving stability of symbol timing; amazing how much difference …
- 11:05 Changeset [5555] by
- adding script to install using make
- 10:27 Changeset [5554] by
- should now send one last voice packet with eom = True when push to talk …
10/26/07:
- 23:44 Changeset [5553] by
- improving stability; flushing output with BPSK samples
- 23:40 Changeset [5552] by
- setting CIREN_CE to use QPSK by default
- 23:39 Changeset [5551] by
- reducing delay of time division duplex test waveform
- 23:29 Changeset [5550] by
- decreasing verbosity of AGC
- 23:28 Changeset [5549] by
- fixing debug output statements
- 23:25 Changeset [5548] by
- adding connection to start USRP RX processing thread
- 22:48 Changeset [5547] by
- fixing makefile.am installation
- 22:45 Changeset [5546] by
- adding support for radio control, resource port
- 22:45 Changeset [5545] by
- tagging metadata in data generator
- 22:31 Changeset [5544] by
- re-creating time division duplex data test waveform
- 21:29 Changeset [5543] by
- adding node identifier property
- 21:09 Changeset [5542] by
- removing port list property
- 18:11 Changeset [5541] by
- initial import
- 17:51 Changeset [5540] by
- removing radio control interfaces from xml, header files
- 17:40 Changeset [5539] by
- initial directory structure for CIREN spectrum manager
- 17:39 Changeset [5538] by
- initial directory structure for CIREN spectrum manager
- 17:39 Changeset [5537] by
- initial directory structure for CIREN spectrum manager
- 17:29 Changeset [5536] by
- configuring metadata appropriately, cleaning up code
- 17:28 Changeset [5535] by
- packing/unpacking ASCII data appropriately; configuring data based upon …
- 17:27 Changeset [5534] by
- forwarding input data based upon its metadata content, removing antiquated …
- 16:08 Changeset [5533] by
- sigprocc_ should be SigProc::
- 16:07 Changeset [5532] by
- PACKET_RS_512 can now create/extract packets of variable length input data …
- 16:06 Changeset [5531] by
- updating byte-packing functions to operate on condition where input size …
- 14:56 InstallationGuide edited by
- added appropriate version of ALF (diff)
- 14:53 Changeset [5530] by
- missing /. typo
- 14:50 InstallationGuide edited by
- formatting change (diff)
- 14:49 InstallationGuide edited by
- added appropriate version of OWD. need to check formatting. still looking … (diff)
- 14:42 Ticket #91 (OWD generates Makefile.am with wrong install directory) closed by
- fixed
- 14:29 InstallationGuide edited by
- this statement is incorrect (diff)
- 14:23 Changeset [5529] by
- getting rid of dom path generation
- 14:23 Changeset [5528] by
- getting rid of dom generation
- 13:59 Changeset [5527] by
- adding three processing threads for tx, rx, and control; setting svn …
- 13:19 Changeset [5526] by
- fixing interfaces
- 13:15 Changeset [5525] by
- look for device scd relative to install path instead of device path
- 13:02 Changeset [5524] by
- changing metadata initialization method to comply with r5523
- 09:48 InstallationGuide edited by
- (diff)
- 09:40 InstallationGuide edited by
- (diff)
- 09:33 InstallationGuide edited by
- (diff)
- 09:30 InstallationGuide edited by
- (diff)
10/25/07:
- 17:35 Changeset [5520] by
- creating RS objects to be members of the base class; move to more …
- 17:25 Changeset [5519] by
- allocating less subheader data to src_id, dst_id, etc.; freeing memory …
- 15:39 Changeset [5518] by
- adjusting header/tail phasing pattern on FrameAssembler
- 14:51 Changeset [5517] by
- fixing install path for ossie_demo 0.6.2 branch
- 14:48 Changeset [5516] by
- accidently put ossie_demo 0.6.2 branch changes in trunk with r5500
- 14:20 News edited by
- Fixed a broken wiki link. (diff)
- 14:18 Changeset [5515] by
- Undo change meant for release 0.6.2
- 13:34 SffsdrLinux edited by
- (diff)
- 13:25 SffsdrLinux edited by
- (diff)
- 13:17 Changeset [5514] by
- removing old code to try to count dropped packets; fixing buffer sizes in …
- 13:14 Changeset [5513] by
- fixing buffer sizes in SCA component wrapper to work with PACKET_RS_512
- 13:13 Changeset [5512] by
- fixing buffer sizes in SCA component wrapper to work with PACKET_RS_512
- 13:12 Changeset [5511] by
- packing samples properly in output realChar port so that C++ components …
- 13:00 SffsdrLinux edited by
- (diff)
- 11:50 Ticket #91 (OWD generates Makefile.am with wrong install directory) created by
- When generating components with the 0.6.2 branch of OWD, the Makefile.am …
- 10:37 Changeset [5510] by
- fixing example in documentation
10/24/07:
- 18:29 Changeset [5509] by
- adding third buffer to ensure no pointer overlap; reducing maximum packet …
- 17:32 Changeset [5508] by
- fixing rc2007_gui and its horrid brokenness
- 15:46 Changeset [5507] by
- adding test to create/extract for PACKET_RS_512; does not yet pass test
- 15:10 Changeset [5506] by
- cleaning up output, fixing npad bug in PACKET_RS_512 subheader …
- 15:06 SffsdrLinux edited by
- (diff)
- 15:00 SffsdrLinux created by
- 14:50 Changeset [5505] by
- decoding subheader data (ids) properly; now passes test; need to clean up …
- 14:45 Changeset [5504] by
- moving from char to unsigned char
- 14:38 Changeset [5503] by
- spd file needs to use relative paths to point to xml and bin. thanks matt …
- 14:33 Changeset [5502] by
- was installing to /sdr/dev/xml. thanks matt for catching this
- 14:30 EmbeddedSDR edited by
- (diff)
- 14:17 Changeset [5501] by
- moving byte packing to unsigned char
- 12:35 Changeset [5500] by
- new ossie_demo waveform for 0.6.2 release
- 12:34 Changeset [5499] by
- removing port_list from properties
- 12:32 Ticket #90 (OWD generates port_list property in .prf.xml) created by
- OWD still seems to generate a port_list property that lists all the …
- 12:30 Changeset [5498] by
- removing port_list from properties
- 12:29 Changeset [5497] by
- trivial changes
- 12:24 Changeset [5496] by
- new RxDemo? for 0.6.2 release
- 12:10 Changeset [5495] by
- new ChannelDemo? for 0.6.2 release
- 11:43 Changeset [5494] by
- new TxDemo? for 0.6.2 release
- 10:27 Changeset [5493] by
- Removed editing existing components section.
- 09:54 Changeset [5492] by
- fixing PACKET_RS_512 encoder/decoder for main data block
- 09:45 Ticket #87 (Create default paths for nodeBooter) closed by
- fixed: Resolved with r5491.
- 09:45 Changeset [5491] by
- Resolve ticket #87.
- 09:29 Changeset [5490] by
- working on PACKET_RS_512 subheader decoder; still does not pass simple …
10/23/07:
- 23:40 Changeset [5489] by
- adding subheader encoder/decoder for PACKET_RS_512; does not yet pass …
- 19:55 Ticket #88 (0.6.2 branch of dtd mispositioned in repo) closed by
- fixed: fixed with r5487:5488
- 19:55 Changeset [5488] by
- copying dtd directory; addresses ticket #88
- 19:54 Changeset [5487] by
- removing extraneous dtd directories; addresses ticket #88
- 16:21 Changeset [5486] by
- took out bdebug stuff and reorganized the component to opperate through …
- 15:57 Ticket #89 (USRP platform fails to compile (problem with standard interfaces?)) created by
- While attempting to build the latest 0.6.2 branch of platform/USRP it …
- 15:47 Ticket #88 (0.6.2 branch of dtd mispositioned in repo) created by
- The 0.6.2 branch of the document type descriptor (DTD) files are located …
- 13:57 Changeset [5485] by
- adding RS encoder; new packet type
- 12:54 Changeset [5484] by
- adding test for punctured RS code
- 10:45 Ticket #87 (Create default paths for nodeBooter) created by
- Currently, you need to tell nodeBotoer the paths to the root of the Domain …
- 10:17 Ticket #22 ((122) OWD does not support direct connection between devices) closed by
- invalid: No one appears to feel this is a real problem anymore.
- 10:13 Changeset [5483] by
- Remove branch, work is merged into trunk at r5482.
- 10:10 Ticket #55 (c_wavloader depends on expat) closed by
- fixed: Resolved in r5482.
- 10:10 Ticket #54 (c_wavloader must run from /sdr/dom directory) closed by
- fixed: Resolved with r5482.
- 10:07 Changeset [5482] by
- Convert from expat to tinyxml. Use SCA file system to find device …
- 09:56 Changeset [5481] by
- Use local copy of tinyxml.
- 09:27 Changeset [5480] by
- Complete c_wavLoader based on tinyxml.
- 08:03 Ticket #52 (Framework crashes when file is not found (FileSystem)) closed by
- fixed: Resolved with r5479. Of course the handling of the exception could be …
- 08:02 Changeset [5479] by
- Resolve ticket #52 (New numbering)
- 07:34 Ticket #53 (wavLoader.py does not work with subversion HEAD) closed by
- wontfix: No one is interested in fixing wavLoader.py. c_wavLoader and alf replace …
10/22/07:
- 21:36 Changeset [5478] by
- adding non-disruptive buffers to symbol timing offset estimators
- 18:35 Changeset [5477] by
- TxFrameTest? now works for burst-mode packets
- 18:34 Changeset [5476] by
- RxFrameTest? now works well with burst-mode packets
- 14:49 Changeset [5475] by
- adding symbol timing offset estimator
- 12:51 Changeset [5474] by
- fixing bug in SigProc?, generate RRC filter coefficients; root check …
Note: See TracTimeline
for information about the timeline view.
