| Version 25 (modified by mcarrick, 21 months ago) |
|---|
User Guides
- OSSIE 0.8.2 Users' Guide
- Earlier versions available at http://ossie.wireless.vt.edu/download/user_guides/
- OSSIE 0.6.2 Component Update Guide Further updates would be required for using these components with OSSIE 0.8.0 and later.
Example Labs for use with OSSIE 0.8.2
- Lab 01 - A Demonstration
- Lab 02 - Using Reconfigurable Component Properties
- Lab 03 - Building Simple Components
- Lab 04 - Building Source Components
- Lab 05 - SDR Application: Building an AM Receiver
- This lab requires USB 2.0 and USRP with Basic Rx daughter board, VMware player 2.0 if using VMware image!
- Lab 06 - Remote Waveform Debugging and Visualization (requires two computers or VMs)
- Lab 07 - Distributed Waveform Applications (requires two computers or VMs)
- Lab 08 - Distributed AM Receiver (requires two computers or VMs)
Example Labs for use with OSSIE 0.8.1
- Lab 01 - A Demonstration
- Lab 02 - Using Reconfigurable Component Properties
- Lab 03 - Building Simple Components
- Lab 04 - Building Source Components
- Lab 05 - SDR Application: Building an AM Receiver
- This lab requires USB 2.0 and USRP with Basic Rx daughter board, VMware player 2.0 if using VMware image!
- Lab 06 - Remote Waveform Debugging and Visualization (requires two computers or VMs)
- Lab 07 - Distributed Waveform Applications (requires two computers or VMs)
- Lab 08 - Distributed AM Receiver (requires two computers or VMs)
Example Labs for use with OSSIE 0.8.0
- Lab 01 - A Demonstration
- Lab 02 - Using Reconfigurable Component Properties
- Lab 03 - Building Simple Components
- Lab 04 - Building Source Components
- Lab 05 - SDR Application: Building an AM Receiver
- This lab requires USB 2.0 and USRP with Basic Rx daughter board, VMware player 2.0 if using VMware image!
- Lab 06 - Remote Waveform Debugging and Visualization (requires two computers or VMs)
- Lab 07 - Distributed Waveform Applications (requires two computers or VMs)
- Lab 08 - Distributed AM Receiver (requires two computers or VMs)
Example Labs for use with OSSIE 0.7.x
- Lab 01 - A Demonstration
- Lab 02 - Using Reconfigurable Component Properties
- Lab 03 - Building Simple Components
- USRP installation instructions are now in the User Guide. A new Lab 4 is under development
- Lab 05 - SDR Application: Building an AM Receiver
- This lab requires USB 2.0 and USRP with Basic Rx daughter board, VMware player 2.0 if using VMware image!
- This lab also requires the component release package, found here.
- Lab 06 - Remote Waveform Debugging and Visualization (requires two computers or VMs)
- Lab 07 - Distributed Waveform Applications (requires two computers or VMs)
- Lab 08 - Distributed AM Receiver (requires two computers or VMs)
Example Labs for use with OSSIE 0.6.2
- Lab 01 - A Demonstration
- Lab 02 - Using Reconfigurable Component Properties
- Lab 03 - Building Simple Components
- Lab 04 - Installing the USRP
- This lab requires USB 2.0 and the USRP, VMware player 2.0 if using VMware image!
- Lab 05 - SDR Application: Building an AM Receiver
- This lab requires USB 2.0 and USRP with Basic Rx daughter board, VMware player 2.0 if using VMware image!
- This lab also requires the component release package, found here.
Example Labs for use with OSSIE 0.6.1
- Lab 01 - A Demonstration
- Lab 02 - Using Reconfigurable Component Properties
- Lab 03 - Building Simple Components
- Lab 05 - SDR Application: Building an AM Receiver
- This lab requires USB 2.0 and USRP with Basic Rx daughter board, VMware player 2.0 if using VMware image!
- Decimator Filter Coefficients 1
- Decimator Filter Coefficients 2
- Decimator Filter Coefficients 3